If there is no compass error, we don't recommend to perform compass calibration on every flight. You may then skip step 1..8. Check Important Notes section if you need to switch from DJI Go to FPV Camera.I am about to practice using Mission Planner fpv camera with panorama mode and would like to verify correct procedure for start up. After reading the help files this is my first reading on the procedure.
1. Start up RC
2.Power up tablet after cacheing maps on internet
3.Power up Phantom.
4.Wait for safe to fly. sat locks and record home point.
5. Complete compass calibration.
6. Close down DJI Go app.
7. Start up Mission Planner, switch to camera section of app.
8. If signal lost indicator comes on close down Phantom and restart.
9. Start up Mision Planner again and wait for good signal and safe to fly message, check homepoint locked.
10. Perform start up control and push throttle up and hover to check all ok.
11. Fly manually to selected panrorama spot, adjust position of Phantom, camera tilt angle and do a practice rotate to ensure correct angles ,headings.
12. Switch to Panorama mode and do set up re camera tilt, number of photos.
13. Press fly and wait for auto panorama to complete.
14. return to home and land.
Please feel free to comment and suggest shortcuts/improvements. I prefer to have this type of procedure list so that I do not make stupid pre flight errors, especially reading how easy it is to cause crashes when reading the forums.
The rest steps are good. In step 11, you don't need to adjust heading as it will always start shooting from 0 degree (north).