issue with channels of boscam ts 321 and rc802

Joined
Oct 19, 2014
Messages
24
Reaction score
10
Age
62
Location
belgium
Sorry, i'm from belgium and writing english not all well.
I bought the boscam ts 321 and the rc 802 (on ebay). But after install, the channels are'nt corresponding .
When i choose channel 1 on the ts, the channel on the rc is 5!
ts channel 8 is on the rc ch4
ts ch7 is on the rc ch 1 . And so on.
My question is, is this normal or a defect?
My first flight has after a few meters some interference.
My screen is a fpv 819A.
 
Yes, i have had the EXACT same problem with my Boscam video system and Dji System. I also wasnt sure if it was defect or normal. I also had a problem with really bad interference after 300ft or 100m. After many hours of research online I found out that Boscam system does not have a strong filter against radio interference. The interference is from the dji transmitter. I ended up buying fatshark googles due to its simplicity and mainly a strong filter against radio interference.
 

Members online

Forum statistics

Threads
143,066
Messages
1,467,358
Members
104,935
Latest member
Pauos31