EspenA said:
...Anyways, by following your guide and get the Webgui up and running on both my repeater and P2V+, I can easily change the channel on both of them, just like we do on our home router?
Changing on repeater and save, change on my P2V+ and change, restart them both.
Correct?
...
Yes.. but it's a bit more complicated..
Installing the WebUI will allow you to make changes to any/all settings just as you're used to doing on your home router. The one caveat to this is that the repeater is in WDS Client mode. What this means is that IF the repeater is unable to connect to the Phantom, it does *NOT* show it's client side (Phantom_XXXXXX) wifi network. Thus, you can't get into it.
The way to make the change is the same as that I describe for enabling encryption in the
'Encrypt Phantom to Repeater' thread. The quick overview is that you must be able to connect to the hidden FC200_XXXXXX network (this name may be different for the P2V vs P2V+), change the Repeater first, , save&apply (it'll become inaccessible), then change the Phantom, save&apply.. after the Phantom re-initializes with the new channel, the Repeater will reconnect and you'll be good.
But, I recommend checking that other thread for detailed step-by-step. If you have any questions / issues, feel free to let me know.
LK