Can anyone tell me what exactly the WiFi board in the camera controls I have video feed,but no gimbal movement,all gimbal motors are new as the ribbon cable! Need some answers!!
Help
- Thread starter Thunderhorse
- Start date
Shoot4fun
Drone bum...
I'll go first here, then the smart ones can jump in afterwards... First, what are you flying? P3, P4, etc. Next, did you use dji OEM ribbon cable? I ask that because I recently replaced one on a P3S, yaw arm, motor mount, yada yada yada... Ribbon cable came with aftermarket kit. Didnt work. I've been told numerous times of this. Waiting on OEM now...
Never mind on drone you're flying. I see now you're in the Standard, so I deduced, amazingly, that you have a P3S. Gettin smarter ever' day...
Brad
Never mind on drone you're flying. I see now you're in the Standard, so I deduced, amazingly, that you have a P3S. Gettin smarter ever' day...
Brad
Last edited:
I replaces all new motors on the gimbal and a DJI ribbon cable. What does the WiFi board in the top of the gimbal control ? DRONE drone doesn't fly either.wifi board cause?
Shoot4fun
Drone bum...
I have to admit that this one is different. Usually it's just the opposite everything works great but no video. the Wi-Fi board should be supplying that video. Somehow you're still not connecting the RC to the AC only your phone or pad is linking to the camera. Sorry that does not solve your problem. Does your remote light ever turn green? Showing connection? Relink?
Yes it turns green,but the red/green button light on the bottom of the drone stay's red and the controller shows green!
I hope someone here can solve your problems as I am new to the P3 series. I fly P4’s so I’m anxious to learn and pass on what I learned of P3’s. I learn everything the hard way, through mistakes but better yet this forum. Good luck
RodPad
Premium Pilot
Hum, I read this yesterday.
This has me thinking....
"Yes it turns green,but the red/green button light on the bottom of the drone stay's red and the controller shows green! "
Remote sees the Phantom, Phantom doesn't see the remote.
I assume, you tried re-linking, I have the feeling it didn't work?
Rod
This has me thinking....
"Yes it turns green,but the red/green button light on the bottom of the drone stay's red and the controller shows green! "
Remote sees the Phantom, Phantom doesn't see the remote.
I assume, you tried re-linking, I have the feeling it didn't work?
Rod
RodPad
Premium Pilot
@Thunderhorse,
Your statement...
"DRONE drone doesn't fly either"
Are you stating you can't start the motors?
People can fly there Phantom with out the gimbal and camera even installed, but it had to have a link before the gimbal was removed, (Both Lights Would Have Been Green)
Basically what I'm saying the WiFi board is not needed to fly the Phantom.
Take a look see at this thread.
phantompilots.com
Its all I got so far....
Rod
Your statement...
"DRONE drone doesn't fly either"
Are you stating you can't start the motors?
People can fly there Phantom with out the gimbal and camera even installed, but it had to have a link before the gimbal was removed, (Both Lights Would Have Been Green)
Basically what I'm saying the WiFi board is not needed to fly the Phantom.
Take a look see at this thread.
Phantom 3 Standard won't connect to Remote controller
Hi Everyone, I am the proud owner of a DJI Phantom 3 standard. The drone use to fly perfectly. Unfortunately it encountered a malfunction while in mid-air and crashed violently (maybe from 30 meters high). I've replaced several parts (camera cable was cut off), even bought a new mother board...
phantompilots.com
Its all I got so far....
Rod
