If you want to use Sunhans amp, lower RE700 TX power may not help. Per DJI spec, RE700 "Transmitter Power 20dBm". Per my understanding, RE700 is configured to 12dBm though it may peak 20dBm (or above) during boot. Hence, even we lower 12dBm to something else, it still peaks 20dBm during boot for 1 second or so. AFAIK, there are many forum members simply direct connect RE700 output to Sunhans without frying the amp.allemtura said:Do you think it would be possible for a future update to allow the lowering of the RE700 Range Extender power by any chance please? Main reason is so that the Sunhans 2.4Ghz booster can be used without frying it.
From reading around I understand that power from the repeater can peak above 20 dBm during boot (input limit on the booster) and then settle below this number afterwards, but that this varies between repeaters.
Rather than spending quite a few ££ on an attenuator, I'd like to use your app to reduce the power slightly as can be done on the other apps. I really don't want to buy a competitors app when yours works really well, especially with ICA.
Perhaps the ability to change this value could be within the iPhone's Setting app so that your main interface still stays clean with the single click button?
However, we are researching to add ICA to the repeater end in future update.