Failed firmware loud beeping rc not linking to aircraft to fix

Joined
Jul 18, 2020
Messages
3
Reaction score
0
Age
54
Location
Austin ark
I'm geno new at this replaced the main board on a phanthom 3 standard requires an upgrade. I stopped the upgrade before it was done.
Now the remote control will not link to aircraft so I can fix it.
 
Try remote sticks calibration to stop the beeping. Then do the link if needed.
 
Got the firmware issues fixed I think. Now the RC connects and dissconects in dji go app. Camera don't move but I get video
 
This is the consequence of not completely uploaded firmware. No mystery here.
Try again and load it completely, if not possible then describe where it stops.
Check if the replaced board and the firmware are appropriate to each other.
 
Hi guys ! I have problem with my Phantom 4 remote controller! I bought controller second hand and it was working perfect but yesterday when I turned on the RC amd the aircfaft and when I started the linking process controller started flashing blue as it should and when i oressed the linking button on the aircraft the controller stoped beeping and the indicator witch was blinking blue turned off at all and in the same time it disconnected the phone and all the buttons on the RC stopped to make the beep noise ! I turned the RC off and when i tried to turn it on again the indicators for the battery are there but no indicator for connection and there is no beeping sound for welcome or from any of the buttons and when i turn it off there is the sound for turning off but it is not that laud like normal and it is like bugged!If someone knows what i can do please text me
 

Members online

Forum statistics

Threads
143,066
Messages
1,467,354
Members
104,933
Latest member
mactechnic