Mori55 said:I really liked that little screwdriver.
BSWCBMD said:RE Rubber Dampers: This morning while unboxing my new Vision+ I noticed that two of the four rubber dampers (diagonally opposite) are unsecured with the clear plastic post.
Venom93corba said:Allen I will be patiently waiting on your review![]()
Phantom 2 Vision, Ragecams 5.4 flat lens
Are you using naza mode ? And any idea if we can do the channel 7 lever mod.AllanVB said:Venom93corba said:Allen I will be patiently waiting on your review![]()
Phantom 2 Vision, Ragecams 5.4 flat lens
Well, I charged the receiver, put a battery in it and took off. Wow, doesn't have the same startup sounds of P2V. And it seems to run smoother - maybe because its new. I was flying for about 10 minutes, before I realized that I had not turned on the camera... duh... excitement. I am real pleased with the response and smoothness. Here is a uncut video . I flew it hard and there is a nice breeze.
http://vimeo.com/user25510811/phantomvisionplus
This is one nice bird!!
Yes I did! Still need perfection, but this is really sweet.. Back out to fly.Dirty Bird said:Sweet! Thanks for posting. Did you switch the gimbal to FPV mode at one point during your flight? I noticed the camera was banking with your turns for a little bit in the middle.
Not sure about lever mod....Mori55 said:Are you using naza mode ? And any idea if we can do the channel 7 lever mod.AllanVB said:Venom93corba said:Allen I will be patiently waiting on your review![]()
Phantom 2 Vision, Ragecams 5.4 flat lens
Well, I charged the receiver, put a battery in it and took off. Wow, doesn't have the same startup sounds of P2V. And it seems to run smoother - maybe because its new. I was flying for about 10 minutes, before I realized that I had not turned on the camera... duh... excitement. I am real pleased with the response and smoothness. Here is a uncut video . I flew it hard and there is a nice breeze.
http://vimeo.com/user25510811/phantomvisionplus
This is one nice bird!!
Dirty Bird said:BSWCBMD said:RE Rubber Dampers: This morning while unboxing my new Vision+ I noticed that two of the four rubber dampers (diagonally opposite) are unsecured with the clear plastic post.
It is normal to only have posts (anti-drops) on two opposing corners. Remember the whole purpose of the rubbers is to dampen vibration. If you secure all four posts, you increase vibration transmitted from the aircraft to the gimbal.
AllanVB said:Yes I did! Still need perfection, but this is really sweet.. Back out to fly.![]()
We use essential cookies to make this site work, and optional cookies to enhance your experience.