DJI GO App issue

Lexuss · Feb 16, 2020

Hello guys. I have a issue with my phantom 3 ADV. The remote link perfect , the tilt from camera work fine, the motors arm great, but in DJI GO APP show me only the Inspire model and I cant choose phantom 3. Any ideas?

JerryA · Feb 16, 2020

Have you tried swiping the screen either left or right?

Lexuss · Feb 16, 2020

JerryA said:
Have you tried swiping the screen either left or right?

yes

3rdof5 · Feb 16, 2020

Sounds like a USB issue. Try a different USB cable between the RC and your device. Some cables charge only and have no data connection which would cause this exact issue. If it's not a cable problem then the USB board on the RC may not be functioning.

Deleted member 62848 · Feb 18, 2020

Do you have iPad to try,,another post here had trouble with android device,,is that a Samsung tab.
Unsure but on the box it mention iPad only ??,,dont have to wait a minute,,once it plugged in with USB it should conect....post called ..p3a cant conect to djigo

tribar · Feb 22, 2020

Press the "How to Connect" button on your screen.

KachemakDiver · Feb 22, 2020

I use a 2015 Samsung Tab E exclusively for flying, works great. There is however a process to set it up for the DJI GO app. Here is the link for it.

Harleydude · Feb 22, 2020

Lexuss said:
Hello guys. I have a issue with my phantom 3 ADV. The remote link perfect , the tilt from camera work fine, the motors arm great, but in DJI GO APP show me only the Inspire model and I cant choose phantom 3. Any ideas?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Unfortunately, the super-low-resolution, mis-oriented vertical video is so crappy I can't even see the tablet's screen.

Fixes:

* Horizontal orientation
* Upload full resolution or AT LEAST 1080p (you might have to copy video off phone to PC and then upload to YouTube)

D

welshach · Feb 27, 2020

Lexuss said:
Hello guys. I have a issue with my phantom 3 ADV. The remote link perfect , the tilt from camera work fine, the motors arm great, but in DJI GO APP show me only the Inspire model and I cant choose phantom 3. Any ideas?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Sounds like failed usb on controller...I had this problem initially when my original controller packed in due to failed controller update!