(Cross-posting on MavicPilots) Wondering if there is a CS screw-on mount that will allow me to move my 7.85 CS from the Phantom 4 Pro V2 mounting bracket (DJI, P/N DJCSP3RCM9, see attached) to a bracket compatible with my Mavic Pro. Conversely, is there a mount for the Mavic that will use the same screw-on bracket used on the P4P V2 CS mount? Trying to avoid having to screw/unscrew the bracket from the CS. Thanks for any light you can shed.........
CS mount for 2 controllers?
- Thread starter RickMz
- Start date
I have a phantom CS mount on a 3D printed Mavic plate which allows me to quickly swap the CS from my Phantom controller to my Mavic controller. I also sometimes use a LiftThor Mavic mount that accommodates the Phantom mount.
Of course this requires the purchase of another Phantom CS mount at $80.
DJI Mavic AIR/Mavic 2 CrystalSky Mount **REVISED** by supergimp
Of course this requires the purchase of another Phantom CS mount at $80.
DJI Mavic AIR/Mavic 2 CrystalSky Mount **REVISED** by supergimp
I have a phantom CS mount on a 3D printed Mavic plate which allows me to quickly swap the CS from my Phantom controller to my Mavic controller. I also sometimes use a LiftThor Mavic mount that accommodates the Phantom mount.
Of course this requires the purchase of another Phantom CS mount at $80.
DJI Mavic AIR/Mavic 2 CrystalSky Mount **REVISED** by supergimp
Wow, great solution! Wish I had a 3d printer
. Was looking at the LiftThor site for the mount you mentioned, found this one: https://www.thorsdroneworld.com/product-page/lifthor-sif-cs-ii but it looks like this is so you don't have to use the OEM bracket. I also found this: https://www.thorsdroneworld.com/product-page/crystalsky-mounting-bracket-for-oem-mount but it doesn't ship until Aug. Can you point me to the correct one (that needs the Phantom CS mount)? Thanks.Similar threads
