- Joined
- Nov 26, 2015
- Messages
- 46
- Reaction score
- 11
- Age
- 77
You said that you have noticed the jitter in all of your videos. Has it been that way since it was new? I'm asking because something commonly overlooked with a new P3 is a small piece of foam behind the gimbal. Accidentally leaving that small piece of foam in place results in a jitter similar to what is in your video.
I know it's a long shot and I realize that's not the only reason for jitter, but it's something easy to check.
Good luck sir!
First of all I want to thank Oso and all of you who pitched in to help solve my problem. I'm happy to say it's now resolved and you can crown me the biggest DA in the room for overlooking the obvious. The culprit was the infamous shipping foam that was placed behind the gimbal. I had seen a mention of that before, looked closely at the gimbal, but did not notice it. After reading another thread on the shaking issue I discovered that many folks had gone for some time with that foam still in place and when it was removed it solved everything. I would have thought that the gimbal calibration would have failed because it's movement was somewhat impaired but I guess not. It might also be a good item for a service bulletin that would be distributed to all registered owners. I just hope that nine months of being restricted hasn't damaged anything.
Here's a video of a before and after flight around my neighborhood.
Before
After