Camera Tilt problem

Joined
Apr 14, 2015
Messages
2
Reaction score
0
Age
34
Every 5 or so flights when I make a turn the camera will go off horizon and not return to normal. I have to land and turn off the drone and start it again to level the gimbal.

Any ideas?


See video of problem

 
Any hard bump landings lately? (euphemistic way of asking if you have crashed)...

Everyone will suggest you do an Adv IMU first.
IMO, To do a "successful" Advanced IMU calibration, try not to get the MC temp warning to appear.
Find a spirit bubble level to get the phantom levelled in all axis.
Make sure phantom has not been flown or switched on in the last hour or so.
Start Phantom Assist and find the Adv IMU screen.
Plug USB into pc and phantom. Power on phantom and do Adv IMU calibrations immediately.
Wait 2 min for green ticks - the faster, the more accurate.

If this fails then it looks like the potentiometer (angle sensor) in roll axis is either burnt or on its way out.
Send back for warranty if you are still covered.
 

Recent Posts

Members online

No members online now.

Forum statistics

Threads
143,094
Messages
1,467,590
Members
104,977
Latest member
wkflysaphan4