Just a suggestion but I highly recommend the Litchi App. It's worth the $25.00. This app puts the Dji app to shame. I started out using the Dji app but would always have video signal problems Etc.... So I did some research and switched over to Litchi and never looked back.
ATTENTION! DJI GO 3.1.0 Buggy Firmware!
- Thread starter Plumber4skinz
- Start date
Can someone adjust all the settings and parameters also using Litchi?
Στάλθηκε από το SM-G935F μου χρησιμοποιώντας Tapatalk
Στάλθηκε από το SM-G935F μου χρησιμοποιώντας Tapatalk
Went out to run some tests, the results are the following:
iPhone 6SPLus iOS 9.3.2 (13F69)
DJI Go App - 3.1.0
Phantom 4 - 1.2.503
Controller - 1.8.0
iPhone 7PLus iOS 10.1.1 (14B100)
DJI Go App - 3.0.0
Phantom 4 - 1.2.503
Controller - 1.8.0
iPhone 6SPLus iOS 9.3.2 (13F69)
DJI Go App - 3.1.0
Phantom 4 - 1.2.503
Controller - 1.8.0
iPhone 7PLus iOS 10.1.1 (14B100)
DJI Go App - 3.0.0
Phantom 4 - 1.2.503
Controller - 1.8.0
Looks like you still have Google maps.
It's strange, after I upgraded to 2nd version of 3.1.0 I got Google maps back again for one flight, then the next one I was back with Here maps and the following function was back to non working...
Just upgraded to 3rd version of 3.1.0 and just checked and I'm still on Here maps...
Here are two how-to vids i made on going back to an earlier version. For android, goto apkpure.com and for iOS, you have to download from within the itunes store.
Android:
iOS:
I found these for Android . Use with caution . Scroll down to see the different versions .DJI GO 3.1.0 APK - ApkPlz
- Joined
- Nov 26, 2016
- Messages
- 71
- Reaction score
- 11
- Age
- 62
Digdat0 thanks for taking time to post and share that ^^ [emoji1]
Sent from my iPhone using PhantomPilots
Sent from my iPhone using PhantomPilots
happy to help! i did an auto update on DJI Go on iOS and it fubar'd my setup, i had to find a way back and wanted to share with others. If you run into issues, post here and I'll do my best to help.
- Joined
- Nov 26, 2016
- Messages
- 71
- Reaction score
- 11
- Age
- 62
I'm new to all this and just want to start without software issues what version would you recommend to install don't have any loaded yet as my P4 arrives Monday , going to try a android a7 tab and a IPad Air 2 ?
Thanks for your support
Sent from my iPhone using PhantomPilots
Thanks for your support
Sent from my iPhone using PhantomPilots
I had the weirdest issue on Thanksgiving.
It was my first flight after updating my P4, all my batteries, iOS app, and controller. I was flying for about 10 minutes and then was in a hover. Out of nowhere the gimbal went limp. I thought the P4 was falling to the ground but then realized it was just the gimbal flapping.
Flew it back and landed. Turned off the P4 and restarted it. Everything has worked flawlessly ever since.
Anyone else have an issue like this?
It was my first flight after updating my P4, all my batteries, iOS app, and controller. I was flying for about 10 minutes and then was in a hover. Out of nowhere the gimbal went limp. I thought the P4 was falling to the ground but then realized it was just the gimbal flapping.
Flew it back and landed. Turned off the P4 and restarted it. Everything has worked flawlessly ever since.
Anyone else have an issue like this?
I downloaded Charles v4.0.2, installed it, then copied an older version of dji go from the app version store.here ya go, made a video how to
I followed the instructions in your howto, but in charles, the program will not show text or xml text in the edit request box. Only a blank page. I cannot edit the string. I tried an older version of Charles and same thing.
Is there another place that I can paste the copied version number like in the raw tab or somewhere else?
How can I fix this problem in Charles?
Last edited:
Not that it matters but I have also google maps installed in my iPhone, but hardly use it. I don't know if this has anything to do with it.
Ive not run into this situation where the XML text was blank. After clicking the get/download button in itunes (with breakpoints enabled in Charles), did you see this type of screen?
Okay, I've also discovered an issue with the latest DJI GO app, but it's not consistent. I use android on 2 different tablets: an Nvidia Shield and a Samsung Tab A (7 in display). The Shield is my preferred display as it's a faster processor and smoother image when flying.
I can link all three devices successfully (RC, P3P and tablet) but as soon as I click on the 'camera' button to access the software the app goes blank and then I get a message to say 'DJI GO has stopped working' and can go no further.
Strangely, when I connect the Samsung tablet, it allows me to connect to the software without a problem, but then I can't seem to calibrate the compass with it. Keeps saying calibration has failed.
Have now uninstalled both, downloaded previous versions, reinstalled them, turned off automatic updates and now working perfectly again.
Are DJI trying to work too much across so many devices with one app?
I can link all three devices successfully (RC, P3P and tablet) but as soon as I click on the 'camera' button to access the software the app goes blank and then I get a message to say 'DJI GO has stopped working' and can go no further.
Strangely, when I connect the Samsung tablet, it allows me to connect to the software without a problem, but then I can't seem to calibrate the compass with it. Keeps saying calibration has failed.
Have now uninstalled both, downloaded previous versions, reinstalled them, turned off automatic updates and now working perfectly again.
Are DJI trying to work too much across so many devices with one app?
Yes and then I clicked the edit request tab and at the bottom where the other tabs were but when I clicked the text tab (I had to click the text tab to open it) because the xml text tab would not show until I right clicked in the text box and click xml to see an xml text tab. The xml text tab would only show after I clicked another tab at the bottom but the xml text window was still blank.Ive not run into this situation where the XML text was blank. After clicking the get/download button in itunes (with breakpoints enabled in Charles), did you see this type of screen?
i was trying to get a answer on why it wasn't following my aircraft icon , i never thought about it being the update. I hate that i have to keep making the map big and moving the screen to keep it on the small screen, hopefully they will fix this. I using a nexus 7 2nd gen and have no problems with it. glad i saw your post.
As far as i know the iOS app cannot be installed other way than to iTunes download due apple account ID.
- Joined
- Nov 26, 2016
- Messages
- 71
- Reaction score
- 11
- Age
- 62
Hello I have been working on the iOS play store for hours now following your detailed prompts in Charles and every thing is there and changes to the version I want 819017958 but will not take always reverts back ? Wonder what I'm doing wrong ? Been a long time since I changed any iOS settings just now find my self on a iPhone again after the Note 7 recall
Thank you [emoji4]
Sent from my iPhone using PhantomPilots
Similar threads
