1. D D S

    Mavic 2 Intelligent Rapid Pro Charger Hub, 3 Batteries & 2 USB Ports in Only $19.99 with Free Shipping

    Ultimaxx Mavic 2 Intelligent Rapid Pro Charger Hub -3 Batteries + 2 USB Ports Only $19.99 with Free Shipping DJI Mavic 2, 5 in 1 Intelligent Multi Battery Charger works as a professional battery charger for DJI Mavic 2 flight batteries and remote controller. With multiple charging ports and 2...
  2. E

    Power form USB socket

    Hi all I am looking at putting some lights on my P3A. This will obviously need some power (12 or 5v). The different options I have read about/though of are 1) Open up the bird and patch in somewhere – not too keen on this idea 2) Patch into the battery – there seems to be some...
  3. A

    DJI phantom 3 pro won’t connect to the app

    So I’ve experienced the infamous (controller connects to the drone but does not connect to the app) issue. I’ve done ALL of the troubleshooting options that DJI gave me. I’m thinking that the issue is in the usb board on the back of the controller. I ordered and new board on amazon. I think it’s...
  4. J

    P4P+: DLing video via USB from onboard controller memory?

    Sorry if this has been asked, but I wasn't able to find it while searching the keywords I could think of. I went flying yesterday. I knew my SD card was full, but I figured I'd format it from the quad at the beginning of the first battery. I did that, but apparently it didn't work, so I didn't...
  5. Tap2FlyCommode

    DJI Goggles - Question About HDMI Port

    [RE: the mini HDMI port ] I have tried to use this as an HDMI out port... to no avail. Would someone kindly/please advise me if this is even possible? Here is why/how: it would be great to be able to run an HDMI cord from my goggles to a computer monitor/tv, so as to fly the drone while my...
  6. C

    USB connect controller to tablet

    On the Phantom 3 4k controller there's a micro USB port, Wich I understand comes with this particular model. I'm confused about wether I can connect via WiFi to my tablet, or connect with this USB port. I also understand the 4k model is just a standard model with a camera and controller upgrade...
  7. H

    RC Question

    Asked this over on P3 Std/4k Forum. Received no reply. So, I'll try here. Re the subject, on the top rear of the controller, there is a USB port with an individual cover. If one unscrews the 4 1.5mm hex head screws, the USB board can be seen. There is a single, fairly narrow ribbon cable...
  8. S

    GO 4 with Litchi with and Galaxy

    Hi Everyone! Got a problem. (I'm using a Phantom 4 Pro) I bought a Samsung Galaxy Tab A (8") for my screen (first Android tablet....I'm an iPad guy) and loaded DJI Go 4 (which works most of the time) and then Litchi. SOMETIMES when I connect the tablet to the RC, the bottom of the Galaxy...
  9. G

    WTB: USB Module for P3 controller

    I believe my USB module may have stopped working on my Phantom 3 Pro controller. I'm looking for someone that has installed a HDMI/USB module and has a USB controller module they would sell.
  10. Reeder_The_Rabbit

    Micro USB Ports on the drone

    Hi, I know that they are micro USB ports, on the drone itself and on the gimbals, but what are they used for and how do I access their functions?
  11. A

    Can you transfer files from...

    The aircraft its self to an iMac itself using the USB cable that came with the phantom? If you can, Are you able to get the full resolution? Thanks Again
  12. 28wins

    Dedicated Satechi USB to Lightning 10" flexible cable thread

    Hello everyone, I am Tom. Very thankful for these forums! Today I am contributing one of my findings. This thread is to show off the solution I picked to solve the dangling cable connecting the drone controller to a phone/ tablet. I have been flying for several years and with my P4, I...
  13. R

    P3S, can I connect phone (Android) with cable to RC?

    Hello all New to the forum, and also just got my P3 Standard. Is it possible/desirable to connect my Android phone to the P3S remote controller via a usb cable? I understand with Pro/Adv versions this is possible, but how about the Standard, where the remote only has a micro-usb port?
  14. CaptainDrone798

    New Phantom Pro/Adv Controller Issue... Dead USB port?

    I received a replacement Phantom 3 Pro from DJI and they included a controller either on purpose or by error. The controller has the good old problem of not being able to send or accept data via the USB port. What this means is that the DJI GO App can't speak to the controller, so any settings...
  15. M

    Remote Controller as relay, double the distance

    Hey guys, I bought a Phantom4, really nice piece of machinery. I have this idea about writing my own pre-programmed flights for P4 and I need some help on how to do that without electronically highjack/interface the remote controller. Any idea how to send commands to the remote controller...
  16. I

    P3 4K not connecting USB to Mac

    Brand new P34K and mac running 10.11.3 Just upgraded from the standard 3... Shot some 4K video and can view it all in the app. but cannot get it to show up on my mac. I know its recognizing the cable being plugged in because when I plug it in, the camera drops to point straight down from being...
  17. T

    Using the USB Cable while flying? Do I have to always use it?

    Hi just a quick question, I have tried flying a couple of times without the USB cable connecting my device to the controller. I've notice that i tend to have signal problems since i stopped using it. Is it recommended to always have your device connected to the controller via the micro USB...
  18. M

    Lost Video Feed after Update

    Phantom 2 Zenmuse H3-3D GoPro Hero 3+ Silver Fatshark Terminator V2 and 5.8GHz transmitter I kept getting prompted to update the Hero. After, I'd power up the craft and the lcd on the Hero only recognized the usb as a power source. Did a factory reset to (hopefully) void the upgrade but to no...
  19. DroneDestination

    Can't transfer pictures and video via microUSB port

    I have a P3S, and if I try to transfer pictures/videos from my Phantom via the gimbal's microUSB port, I cannot access the microSD card. I turn on the P3 before beginning transfer. Please help!
  20. O

    What is the function of micro-usb connector?

    1. What is the function of micro-usb connector on P3P rc-controller? 2. There is any way to simultaneously use and charging (from external powerbank) pad/phone?