p3p

  1. csparks

    Phantom 3 Pro. Compass error. Exit GPS mode. ,after rebuild

    Apologies if the answer is already out there but could not find a post on this after a water crash. I have crashed my P3P before and rebuilt it with no problem. Have a few hundred flights before and about 100 after the first crash. I crashed it again and this time 2 of the prop arms went...
  2. N

    Gimbal Pitch Not Working

    I have a weird one. I flew my P3P last Sunday with no issues. Put everything away as usual. Took everything out this afternoon to fly, setup with DJI Go, launched, went up to around 100 feet and started checking the horizon, exposure, etc. When I went to adjust the gimbal pitch I get nothing. I...
  3. H

    Upgrade Cam/Gimbal on P3A - Downgrade To P3P To v.01.07.00 Firmware

    The title explains what I wish to do - add the P3P 4k camera and gimbal to the P3A. All the posts here and otherwise say I also need to install the P3P firmware so the upgrade cam/gimbal operates OK. Has anyone successfully installed an older version (01.07.00) of P3P Firmware via the micro SD...
  4. L

    Latest DJI Go not running on Ipad Mini 3 with P3P

    I have used an Ipad Mini 3 with my P3P for the last year without issues. However I am now getting stuttering video with half of the screen missing, freezing frames, etc. on my Ipad Mini 3. The video from the controller HDMI port displays fine on a monitor. I changed a lot of settings etc. and...
  5. victorymike

    2017 11-10 Sugarloaf Mountain to Hogback Mountain after a snowstorm

    After the snow yesterday and last night we put on our Yaktrax and hiked up Sugarloaf Mountain to take in the view. Michelle and I took some pictures and I flew my drone all the way to Hogback Mountain and back. MJ had fun playing in the snow. It was a great day.
  6. D

    Is gimbal disconnect a firmware glitch?

    Hi everyone Purchased a pro 3 and software was out of date so undertook the firmware / calibration watched a thousand flights and tutorials etc and then noticed gimbal disconnect message I have live feed and gimbal is fully controllable, however when i press record button the footage is...
  7. Cobalt Echo

    P3P - No gimbal movement

    Hi All, Long time race drone pilot, new P3P pilot. I like to think I’m technically competent. Recently acquired a P3P and currently having gimbal issues. Any trouble shooting steps to eliminate issues or define the issue would be appreciated. Facts are: 1) Drone was working fine the...
  8. H

    Phantom 3 Gimbal Dampers

    Quick question: Are the gimbal dampers for the P3P the same as those for the other models in the P3 Series??? Better question still, are those dampers interchangeable between models?? If not, what is the part # for the P3P dampers? I think I know the answer, but "think" is a weasel word, so...
  9. MassDrone

    Bright New England fall colors - 4K

    Flew my P3P around the neighborhood this afternoon, and the fall leaves are very bright in spots. Great weekend for flying the drone.
  10. GrammatonxXXxCleric

    P3A vs. P3P downlink stream bitrate comparison

    Here is a video I made flying both Phantoms on the same Litchi mission. You can see the differences in the video quality displayed. I forgot to label each one so the P3A is on the left, the P3P is the one on the right.
  11. MassDrone

    New England fall colors - 4K

    In eastern Massachusetts, the leaves are starting to get very bright in some areas. Shot with P3P, edited and graded in Premiere. Music by Kai Engel.
  12. H

    Questions On Firmware Upgrade of P3A to P3P With Cam/Gimbal Change

    The subject tells you what I'm doing. To complete this mod, I'll need a firmware upgrade. My questions are: 1. The bird will need its firmware upgraded. Recent discussion has shown problems, some significant, with later upgrade versions. What's the best version to use from your experience...
  13. H

    WTB P3P Cam and Gimbal In Working Order

    WITHDRAWN - FOUND ONE The title says it all. Thanks for any help.
  14. H

    Are the P3 4k camera and gimbal the same as those on the P3P??

    I've already read significant discussion on this group about upgrading the P3A by using a "4k cam and gimbal and upgrade the P3A's firmware to P3Ps." However, I'm somewhat discomboberated as to the terminology being used. So, please allow me to ask these questions (I abhor wasting good...
  15. JBR

    Check this after each update...

    Yesterday after updating to latest version on my nearly 2 year old P3P, I went in to check all my settings. Both RTH and Max Height were cleared and reset to 0. Good idea to check these not only after each update but before taking off on each flight. Only takes seconds.
  16. bobomet

    Point of Interest Not Working

    I've been away for a little while, travelling with a video crew in South America, and couldn't take my Phantom 3 Pro. I'm trying to set up a POI flight, and am set up for "Enable Multi Mode". I'm following a video tutorial from a couple years ago, and am finding that switch to "F" mode is not...
  17. JBR

    P3P Tree Strike and crash...no damage!

    Recently while filming a friends daughters wedding at the lake (on very short notice) I was videoing the ceremony using fpv goggles with a novice spotter who was there more to make sure I got the best video composition and not watching the location of the copter. While moving right with the...
  18. GrammatonxXXxCleric

    Lumber yard in the dark- Portland Oregon

    Re-flew this spot with better lighting and movements:
  19. T

    Can't Downgrade to RC 1.8 Firmware

    My RC was on Firmware 1.9.2 and I can't seem to get it to RC 1.8. Using the DJI Go App method (on iOS), I held the 3 lines in the upper right to get to the rollback menu, where I had 3 choices for Firmware: 1.58, 1.6, and 1.8. Choosing 1.8 and hitting download: Download failed (no matter how...
  20. MassDrone

    Rainbow

    A sunny afternoon flight over the forest in New England. Spotty rain showers off in the distance. One shower is in just the right direction to grace us a with a rainbow.