issue

  1. J

    Gimbal shake

    Hello, this is my first post and english is not my native language, so I'm sorry if im not very clear. I'm kinda desperate since this issue is appearing in almost every flight making many of my recordings useless. This issue happened to me before but it wasn't frequent, nowdays it happens at...
  2. Infinite_parts

    Phantom 3 Pro gimbal falls asleep after drone is turned on / no signal

    Hi folks, Another issue with P3P. Not sure what really happened but now P3P gimbal is falling asleep after drone is turned on. It dances that starting loop then green light blinks few times and camera goes down like falling asleep. I know that GL300C RC is recently upgraded. Yesterday this P3P...
  3. Infinite_parts

    P3P not updating at all - always ends up with red light and long D... buzzer!

    Howdy! Any ideas on fixing that? Short description: Having P3P with 4K camera and gimbal. Most probably issue starts in gimbal because before trying some updates there was "No image transmission signal" message on DJI Go App. Have tried different ways formatting SD card, putting different...
  4. Weston Ney Photography

    Calling all Airports!!!

    Hello everyone! I live in a small town in the Willamette valley of Oregon, and I have a job to shoot a real estate drone video with my Phantom 3. Trouble is, this house is in the center of town, within 5 miles of 3 different airports! Two are privately owned, and one is owned by the city, but...
  5. W

    Phantom 4 gimbal issue

    Hello guys. I've been having an issue with my Phantom 4 gimbal. I got recommended by a friend to register and share in Phantom Pilots my issue. My name is John and I'm from Portugal. Well. To start I don't have much of a flying experience and after a small crash with my Phantom 4 I've been...
  6. sudarwika_bali

    Phantom 3 Advanced and iOS 11 Connection Problem

    here iam trying to help! Guys, If You Facing Connection Issue Through DJI Phantom 3 Advanced and Apple Device iOS 11. Might Solve Your Problem After Watching This Video. Thank You
  7. V

    Standard Distance Won't Go Over 400-700ft

    My phantom 3 will fly around 500-700ft away before complete signal loss and returns home. The firmware is on the latest and no modifications to the controller or drone. Any help?
  8. L

    Professional P3PRO firmware update keeps failing

    Hello Community I am having a problem with my phantom 3 pro. It is constantly beeping very loud whenever you turn it on due to a failed update. I now have tried to reinstall the firmware on the drone (01.11.00) but it keeps failing over and over again. I have tried it using several micro SD...
  9. D

    Should i fly my drone from home?

    Hey, I have Phantom 3 FC 40 (without any upgrades) and I wanted to know if I should fly the drone from the balcony to outside. Once I tried to turn on the drone in the balcony and the LED indicator showed that below 5 satellites are found even thought when it'll be outside it will have a...
  10. ethan.irish

    New Flyer- Few Questions/Problems

    Hi, I just bought a refurbished DJI Phantom 3 Standard and after a dew flights, I have been finding a few issues while testing out the features. I also have general questions about the drone: 1. When I fly out to about 1500ft, I lose connection. 2. When I set the home for "Return to Home" it...
  11. R

    DJI Phantom 4 - NO IMAGE - Probably a flex cable issue [VIDEO]

    Here's the issue i'm having with the Phantom 4: . . 3rd of April 2017 - I'm out on a remote island shooting... . I was halfway around the island when my feed went blank... Praise the Almighty, the RTH worked and a thousand intense heart beats later, the drone was back in sight... . However the...
  12. R

    Battery issue

    I did the battery hack to expand to a bigger battery. As per most of what I have read, the board gives me led1 flashing and red lights on drone stating low battery. When I check voltage, actual voltage on battery is 11.7v. So, what can I do to get this thing to recognize that it's got a charge...
  13. I

    Batteries: not 100% charging and LED never stop

    I have 3 Ph4pro batteries. After doing an update in Jan/Feb, all three now will not fully charge. 88% is as high as they will display. When on charge, the LED's eventually go into a never ending sequence of 1234 on, of for about 5 seconds and the 1234 on. I have just run one down to 8% to see if...
  14. kalmargyula

    P3P gimbal - slowly tiling left & right

    Hello friends, I'm new to this forum, but I do have about 1.5 years of experience with this model ( probably around 40-50 hours of flight without a single major issue). My first problems with my P3P started last June when I had to change the gimbal (it had vibration issues, but I needed it...
  15. thefrisbee995

    How close can I get to this castle?

    So there is a castle I know of, you can see in this video I made (at 1:12) that I went close to it but I didn't want to fly right over it. My question is, is it legal to fly over it if it is privately owned? I usually only fly in public places where I know I am allowed so I don't annoy anyone or...
  16. J

    One motor spinning slow before take off - is this issue?

    Might be a silly question but my dad has a DJI Phantom Vision 2 + and when you start up motors before take off one seems to be running slow when you look directly down on them, also when you power it down it shuts off much quicker. We did not want to fly it incase there was an issue, has this...
  17. A

    Phantom 3 Standard - Argtek Issues

    I recently obtained an official, Argtek antenna mod, and to the best of my knowledge installed it correctly, with the white wire on the bottom, and i'm only achieving 200m out of it with constant interference notification popping up. I have flew my drone in this place multiple times at the same...
  18. B

    Professional Phantom 3 Professional Flight Issue

    I have been flying my phantom 3 professional for about a month now. Every time I fly I try to go further but it will tell me "weak transmission signal" and the camera feed will cut out. This occurs after only about a few blocks away so less than 500 feet. I am at about 17-18 satellites whenever...
  19. agustin9200

    DJI GO don't recognize Controller

    Hi to all, i need help with a problem that i am having with my Phantom 3 Professional. The app of DJI GO dont recognize any more the remote controller. The controller connect to the aircraft i can move de camera but the when i open the DJI GO app, i seem that is not conected, previously it...
  20. tml4191

    !?! How come no one else is talking about this 3:2 Vignetting Problem on the P4P?

    This needs to be put to light! Check out this full thread^^^ Click the Link Summary: The picture on the left is the Full image, while the other other one on the right is processed in adobe's PS, but it also does it too in LR, , and it calls it "1:1". LR automatically crops/lens corrects these...