h3-3d

  1. S

    Phantom 2 + Zenmuse H3-3D : FLIR Duo R

    Hi All, I'm wanting to build a relatively low budget thermal imaging drone, And I am struggling to find adequate information about the intergration between the DJI Phantom 2 with the H3-3D Gimbal and the flir Duo R camera. I'm wondering if there is anyone out there that has done this build...
  2. L

    Crash every flight with gimbal

    So I sorted out the rest of the problems with the Phantom 2. Flew it for a while. Charged all the batteries again to a full good charge. Connected the H3-3D with gopro and went to do a test flight. The initial crash occurred with the camera set-up on the P2. It flipped over from about 20 feet...
  3. 1

    Trying to sell P2 with Gimbal.. but need help fixing it

    Hey guys! I'm new to this thread but I'm trying to sell my P2 with its H3-3d Gimbal already installed however for some reason now when I turn on the device it is stuck at like a 15-degree angle and won't go up any further (here is a picture: H3-3D Gimbal Broken..). I've tried plugging it into my...
  4. L

    H3-3D seems not responsive

    hi , I bought recently a P2 with H3-3D and go pro 4. I use it in snow and a little of it wet the bottom of the H3-3D and the ribbon allimentation cable start to smoke , I after realise the cable had been dommaged att the connection with tilt motor. So i change the cabble but the gimbal seems...
  5. M

    FPV in three purchases?

    I've slowly assembled parts in the drone world, and have a phantom 2, gopro hero3+, h3-3d gimbal, and now am looking to explore the world of FPV. Would these three parts do the trick? Transmitter Amazon.com: ImmersionRC 600MW 5.8 GHz A/V Transmitter: Toys & Games Cable Amazon.com : Goliton®...
  6. Natalio

    Dual battery for Phantom 2 + Zenmuse H3-3D?

    Hi, I have a Phantom 2 (isn't the Phantom 2 Vision nor Phantom 2 Plus) with Zenmuse H3-3D and FPV...It's compatible with any pack of lipo batteries for the mode dual battery? I have read something about this ... but I can not confirm it as it is in reference to the Phantom Vision... MaxAmps...
  7. Mako79

    P2VPlus with H3-3D 1.0 and GoPro 4 Hero Black

    Sounds like a Frankenstein of a machine. There is going be a very small window of users who have done this mod. It's the GoPro + H3-3D mod where you can still use the DJI Vision App. DJI Phantom 2 Vision+ Plus 2.4ghz Wifi Module - wiring diagram / camera connection - Page 17 - RC Groups This...
  8. G

    The THING ...

    Wanted to do something a bit different but became something weird at the end. To watch with sound.
  9. J

    FS: DJI Phantom 2 (V2.0) - 2 Avail - Like New Condition!

    Selling 2 of my Phantom 2 (v2.0) Quads - if you prefer to use your GoPro or want to flexibility of the GoPro vs the Vision or P3 camera, this is a great option! To those who prefer the capabilities and integrated DJI camera - look to the P3. Personally, I preferred to use my modified Hero4...
  10. A

    DJI Phantom 2 with FPV system and extras

    My DJI Phantom 2 is up for sale. I am the first and only owner of this drone (Bought new in April 2015 from EZ Drones here in San Diego). I am also the only person who has ever flown it. The drone has never been crashed and has always been kept in it's hard case. Needless to say, the drone is...
  11. G

    Zen-Muse H3-3D spare motors?

    Hi, I am trying to find a new brushless motor for my Zenmuse H3-3D gimbal. It would seem most websites that offer Zenmuse spare parts do not carry spare motors. Does anyone know where I could find this spare part - or a compatible alternative (or a crashed gimbal available for spare parts)...
  12. D

    GoPro 3+ Silver update 3.02

    I recently updated my camera firmware and now I cannot get the camera to go to any functions. All that is shown is the USB symbol and charge status while attached to the H3-3D gimbal and also viewed through my FPV monitor. Any others know of a fix or a way to revert the firmware?
  13. D

    H3-3D will not tilt up after full tilt down

    I have a h3 3d and have tried it on 2 different P2, It seems to work fine until i tilt all the way down, then if i try to tilt up it only come up maby 10-15 degrees and then becomes unresponsive, I have tried to reset the gimbal using the tweezers, and have updated firmware. Help I am a little...
  14. M

    H3-3D Issues

    Hello Pilots! I recently purchased Phantom 2 with H3-3D Gimbal, and noticed aligning issue with Zenmuse, I tried all available options posted on this forum, none of them worked and I decided to contact DJI support, wrote several emails and called several times, with no luck.... Questions...
  15. M

    Gimbal won't angle up or down. Help?

    Hey guys, so my gimbal used to be able to look up and down by using the knob control on the left corner of the Phantom 2 controller. Somehow, it stopped working though, and only stays at a 45 degree angle. Besides that, the gimbal works fine, it just doesn't respond to when I try to angle...