Hello everyone. I just rebuilt a phantom 2 with h3 3d in a new shell since I cracked the old one. Before the rebuild, I could still fly the phantom no problem, just part of the shell was cracked. Now when I fly it, it tends to spazz randomly. I'm flying smoothly, and then BZZZZZ it twitches a little, then goes back to normal. Everything seems to be connected correctly, I get the green GPS lights, and I have recalibrated the IMU and the compass. The Phantom 2 is pretty much stock all the way around, with the h3 3D. Even stock controller. If this was your phantom, where would you start in diagnosing the problem? I've thought about a few things, such as a loose, or not fully plugged in wire (everything I disconnected seems fully seated), something loose with an antenna and connection breaks for a moment, something to do with the GPS... I don't know. Any help would be greatly appreciated. Thanks!