sos problem with phantom

[cave_man]

I have a problem with the phantom
after changes made to the motor does not get up from the GROUND
https://www.youtube.com/watch?v=9a9at7IH8y8
and connections

hart is ccw
hat is cw

 

[dcoski]

It is hard to tell from your video, but it looks like your two black top propellers are spinning the wrong direction. recheck and see if that is correct. If it is the three wires between the motor and the ESC's switch two of the wires on the ESC and you should be OK.

 

[cave_man]

black top propellers is the ccw
and withe is cw

 

[Damon]

Looking at video it appears all the motors are spinning the wrong direction. They are turning into the down side of the props. Just switch two of the wires from motor to ecs and they should spin the correct direction. This will need to be done on every motor.

 

[cave_man]

but the installation was in accordance with the manual

 

[cave_man]

please check the video at 0.32 and 0.36 the back cw

 

[sergekouper]

To me it looks like your motors are not spinning in the right direction according to their position. they should be:
Left front: Clockwise
Right front Anticlockwise
tail left anticlockwise
tail right clockwise.
I believe you got the exact opposite.

 

[cave_man]

want to tell me that I had to link them upside down by saying that the manual?

 

[sergekouper]

want to tell me that I had to link them upside down by saying that the manual?

All I know is that the correct rotation direction for a quad (in X config like the P2) is the one I gave you... pictures here may help you.
https://www.google.co.uk/search?q=quadc ... B450%3B463

 

[OI Photography]

the T-motor instructions are confusing and many people have ended up wiring them backwards as a result...follow the instructions the other members posted above and you'll be fine. The motors need to turn in the directions serge listed.

 

[cave_man]

will change only the connections in the esc?
Or should I change the motor position?

 

[nwillitts]

just the esc.

 

[cave_man]

Left and right
No the center cable
Ok?

 

[Damon]

Agreed just switch two wires to make motors spin in correct direction. Motors are on correctly just spinning wrong direction.

 

[N017RW]

Left and right
No the center cable
Ok?

Swapping any two wires will reverse the rotation.

 

[cave_man]

switched connections and now all is good
Thanks all