As I mentioned in the topic I removed my Phantom 1 Blade Guards and unfortunately re used those screws. I recently read this can damage the drone if they are too long. Worst case scenario....these screws damaged components what am I looking at?
Do you get a “ESC” error message on your device screen while in the DJI GO app?As I mentioned in the topic I removed my Phantom 1 Blade Guards and unfortunately re used those screws. I recently read this can damage the drone if they are too long. Worst case scenario....these screws damaged components what am I looking at?
Phantom 1 does not use go app he will most likely have to replace all 4 motors and maybe each escDo you get a “ESC” error message on your device screen while in the DJI GO app?
If not,then you might get lucky and didn’t damage the motors. If even one motor is damaged, you will get the ECS error message when trying to start the motors.
Oops, I skipped over the phantom 1 while reading the post.Phantom 1 does not use go app he will most likely have to replace all 4 motors and maybe each ecs
We use essential cookies to make this site work, and optional cookies to enhance your experience.