So finally took my P4 out to get some awesome shots at the national park. Problem was every time a gust of wind hit it and the motors revved I'd panic and bring it back. Considering I was standing on a rocky outpost and there was a cliff going down at least 300 feet you may understand my reluctance. Basically am I being over cautious ? Or is a soft breeze nothing to worry about even though the drone revs really hard.
A soft breeze (less than 10mph) is nothing to worry about while flying. My limit is 25mph winds. I will test the winds at altitude by letting it float away in ATTI mode, no stick input. About 20 seconds is enough time to measure the speed, but while looking at the speed indicator in GO during the ATTI float, when it stops accelerating, that's your wind speed. If you get into a bad wind, fly as low as you feel comfortable to minimize the wind effect on your craft, and then go home asap, if it's possible.
By the way, if you do get into a windy scenario, this is your opportunity to fly upwind and then make a fast pass flying downwind......to set a personal speed record. Breaking 60 is the goal.
In windy conditions it may be impossible to safely land the craft, forcing you into a hand catch. So you need to be comfortable hand catching if you get into a 15+ mph wind scenario, otherwise don't launch. If you have a upwind natural windblock, such as a building or a cliff, you may be OK to land on the ground. When landing in 15+mph winds, sometimes even 10mph, the craft has a tendency to tip over when landing on the ground, breaking props. Taking off in a wind can do this too, so I try to launch downwind of a structure that will block the wind. If a windblock isn't available, I will hand launch, which can be dicey if you don't have a helper to help do the hand launch. It is possible to hand launch by yourself, but you need a harness to hold the RC in order to facilitate one handed motor activation.