Hello Jason!! Advanced calibration performed. Now fly more stable, but I have this problem, when I upload it fast it goes to the right. Control module? Thank you
Calibrate the sticks on both the controller and P2 using there respective software.
First, connect the controller to its software then calibrate both sticks and all three switches and make sure the controller is in
mode2. When you have completed the calibration disconnect from the computer but leave the controller turned on.
Next, connect the P2 to its software and calibrate the sticks and switches again in the
RC tab under
basic. When finish make sure all sticks and switches are in
NORM position, transmitter version is in either
upgraded or
basic the
U slider is setup for
failsafe in the pull down.
Since you have a stripped down P2 (no gimbal or camera) it is not necessary to calibrate X1 which controls tilting of the gimbal.
Calibre las barras tanto en el controlador como en P2 usando el software respectivo.
Primero, conecte el controlador a su software, luego calibre ambos dispositivos y los tres interruptores y asegúrese de que el controlador esté en modo2. Cuando haya completado la calibración, desconéctese de la computadora pero deje el controlador encendido.
A continuación, conecte el P2 a su software y calibre los palos y conmutadores nuevamente en la pestaña RC debajo de básico. Cuando termine, asegúrese de que todos los palos e interruptores estén en posición NORMAL, la versión del transmisor está en versión mejorada o básica, el deslizador en U está configurado para seguridad en el desplegable.
Como tiene un P2 despojado (sin cardán o cámara), no es necesario calibrar X1, que controla la inclinación del cardán.