1. Connect the red and black plugs of the charger cable to the charge
socket. Make sure the red plug to the red charge socket, and the
black plug to the black charge socket.
2. Insert the AC power cord into the charger and AC cord into a wall
socket (100-240V). The charge status LED will flash green.
3. Select the battery type switch to LiPo and the current switch to 2A.
4. Connect the battery connector to the XT60 connector of charger
cable, and the battery balance wire to the 3S balance socket.
5. Start charging. The 1S/2S/3S cell LED will glow constant red.
When the charge status LED glows constant red, it is charging in
CC (Constant Current) mode. When the charge status LED blinks
green & red alternately is in CV (Constant Voltage) mode.
6. When the cell LED is flashing, the cell is balancing.
7. When the battery is fully charged, the charge status LED will glow
constant green.
8. Please disconnect the battery and the charger.