It is greenI still have no answer of the link light on the bird.
That's is all I'm asking now.
Rod ..
Phantom 3 Standard
- Thread starter Candoman62
- Start date
captainmilehigh
Premium Pilot
Ok. (The main light on the RC should be green also)......and once the bird has completed warming up, the front LED lights should be solid red, and the rear LED lights should be blinking green.
Can you fill us in on what you see on the GoApp?.......like 'Ready to Fly', number of satellites, battery power levels, etc......
Any other info you can provide will give us an idea of the drones status.
RodPad
Premium Pilot
Yes!!
Now we got a direction of travel.
Captain High.
Has the best question at the moment.
Addition when the Bird is powered on, should be 4 beeps.
Each beep is actually coming from each motor. YES REALLY!
Rod ..
Now we got a direction of travel.
Captain High.
Has the best question at the moment.
Addition when the Bird is powered on, should be 4 beeps.
Each beep is actually coming from each motor. YES REALLY!
Rod ..
RodPad
Premium Pilot
FIRMWARE?
In my Signature.
"P3S => Fly-it or Fryware-it (Rod)"
P3S, Fly It or Fry it with Firmware.
Rod ..
In my Signature.
"P3S => Fly-it or Fryware-it (Rod)"
P3S, Fly It or Fry it with Firmware.
Rod ..
captainmilehigh
Premium Pilot
@Candoman62 ....
If you are doing any bench testing INSIDE, be sure to take the props off the drone. It is simple......2 are clockwise, 2 are counter-clockwise. With props off you can test startup and takeoff procedures without the drone jumping up and chasing you across the room. Plus, if you get nicked by a spinning prop, it hurts like h*ll. (Don't ask how I know that)......
Since it is linked now, we need more info why it won't fly. Any info that you can pass along would be great.
If you are doing any bench testing INSIDE, be sure to take the props off the drone. It is simple......2 are clockwise, 2 are counter-clockwise. With props off you can test startup and takeoff procedures without the drone jumping up and chasing you across the room. Plus, if you get nicked by a spinning prop, it hurts like h*ll. (Don't ask how I know that)......
Since it is linked now, we need more info why it won't fly. Any info that you can pass along would be great.
RodPad
Premium Pilot
@Candoman62
Where did you go?
Also where did you buy your batteries?
I really haven't flown much for 5 years, I got 10 batteries, well I don't trust them. Had charged them once a month for the last few years, there discharge time was 10 days. I watched a instruction video on uBoob. I still have to think which lever does what.
Rod ..
Where did you go?
Also where did you buy your batteries?
I really haven't flown much for 5 years, I got 10 batteries, well I don't trust them. Had charged them once a month for the last few years, there discharge time was 10 days. I watched a instruction video on uBoob. I still have to think which lever does what.
Rod ..
It wants to Activate the drone and every time I get to that point it says to fails to activate and I can't go any further.
I turned the RC on and then the drone, all the lights are on as you described them.
Now I'm waiting for DJI to give me a code to login to DJI Go.
ExpertPower Direct for the batteries.@Candoman62
Where did you go?
Also where did you buy your batteries?
I really haven't flown much for 5 years, I got 10 batteries, well I don't trust them. Had charged them once a month for the last few years, there discharge time was 10 days. I watched a instruction video on uBoob. I still have to think which lever does what.
Rod ..
RodPad
Premium Pilot
"It wants to Activate the drone and every time I get to that point it says to fails to activate and I can't go any further.
I turned the RC on and then the drone, all the lights are on as you described them.
Now I'm waiting for DJI to give me a code to login to DJI Go"
If the link light is green on the bird and the remote you should be able to start the motors.
Also whats the light pattern on the front and back by the props?
I don't understand why you need a code to activate for DJI Go.
At the moment all I remember is all you need is an account with DJI. Your name, email, stuff.
I guess I'm using the same account P2V+, from Feb 2015?
Since then
P3S
P3A New.
P3A Used
P3A Used (Bad motor as of March 2025)
P3A Used.(Afraid of the batteries) April 2025.
MM1 New (Oct 2019)? I think.
The only thing I can think of, that birds mac address is already registered with DJI?
But, I thought that was the newer stuff?
Any members got other intel.
Rod ..
I turned the RC on and then the drone, all the lights are on as you described them.
Now I'm waiting for DJI to give me a code to login to DJI Go"
If the link light is green on the bird and the remote you should be able to start the motors.
Also whats the light pattern on the front and back by the props?
I don't understand why you need a code to activate for DJI Go.
At the moment all I remember is all you need is an account with DJI. Your name, email, stuff.
I guess I'm using the same account P2V+, from Feb 2015?
Since then
P3S
P3A New.
P3A Used
P3A Used (Bad motor as of March 2025)
P3A Used.(Afraid of the batteries) April 2025.
MM1 New (Oct 2019)? I think.
The only thing I can think of, that birds mac address is already registered with DJI?
But, I thought that was the newer stuff?
Any members got other intel.
Rod ..
captainmilehigh
Premium Pilot
RodPad
Premium Pilot
I'm going to hijack this thread.
Get this
www.expertpower.us
Actually this part.
If I'm not logged on to Amazon.
If I'm logged in to Amazon.
Anyways, I'm going to order one.
Rod ..
Get this
DJI Phantom 3 Replacement BatteryDefault Title
Compatibility: Perfectly fits DJI Phantom 3 Series Models (DJI Phantom 3 Standard, Phantom 3 Professional, Phantom 3 4K, Phantom 3 SE). Meets FCC, RoHS, CE safety standards. Extended Flight Time: Up to 23 minutes on a single charge (15.2V, 4500mAh). Actual time may vary based on conditions...
www.expertpower.us
Actually this part.
If I'm not logged on to Amazon.
If I'm logged in to Amazon.
Anyways, I'm going to order one.
Rod ..
Last edited:
Just turning on the RCI I don't see a wifi signal, only when the drone is powered on
I tried the RC again and my Phone sees the WiFi, as does the Drone itself when it is turned on by itself. Both items are not seen in My wifi when they are turned off which is normal.
RodPad
Premium Pilot
@Candoman62,
I don't 'understand your last three posts.
# 32 your replying to my post # 2
# 33 your replying to your post # 32
# 34 your replying to your post # 33
I think you should delete those, way to hard to follow.
Rod ..
I don't 'understand your last three posts.
# 32 your replying to my post # 2
# 33 your replying to your post # 32
# 34 your replying to your post # 33
I think you should delete those, way to hard to follow.
Rod ..
captainmilehigh
Premium Pilot
I'm still wondering if he got the GoApp working.........post #30.@Candoman62,
I don't 'understand your last three posts.
# 32 your replying to my post # 2
# 33 your replying to your post # 32
# 34 your replying to your post # 33
I think you should delete those, way to hard to follow.
Rod ..
Similar threads
