Phantom 3 Standard

[Candoman62]

I still have no answer of the link light on the bird.
That's is all I'm asking now.

Rod ..

It is green

 

[captainmilehigh]

It's been linked but... It doesn't fly

Ok. (The main light on the RC should be green also)......and once the bird has completed warming up, the front LED lights should be solid red, and the rear LED lights should be blinking green.

Can you fill us in on what you see on the GoApp?.......like 'Ready to Fly', number of satellites, battery power levels, etc......

Any other info you can provide will give us an idea of the drones status.

 

[RodPad]

Yes!!
Now we got a direction of travel.

Captain High.
Has the best question at the moment.

Addition when the Bird is powered on, should be 4 beeps.
Each beep is actually coming from each motor. YES REALLY!

Rod ..

 

[RodPad]

FIRMWARE?
In my Signature.
"P3S => Fly-it or Fryware-it (Rod)"

P3S, Fly It or Fry it with Firmware.

Rod ..

 

[captainmilehigh]

@Candoman62 ....

If you are doing any bench testing INSIDE, be sure to take the props off the drone. It is simple......2 are clockwise, 2 are counter-clockwise. With props off you can test startup and takeoff procedures without the drone jumping up and chasing you across the room. Plus, if you get nicked by a spinning prop, it hurts like h*ll. (Don't ask how I know that)......

Since it is linked now, we need more info why it won't fly. Any info that you can pass along would be great.

 

[RodPad]

@Candoman62

Where did you go?
Also where did you buy your batteries?

I really haven't flown much for 5 years, I got 10 batteries, well I don't trust them. Had charged them once a month for the last few years, there discharge time was 10 days. I watched a instruction video on uBoob. I still have to think which lever does what.

Rod ..