- Joined
- Jan 23, 2016
- Messages
- 6
- Reaction score
- 0
- Age
- 58
- Location
- Louisiana - Greater New Orleans Area
When I first flew my P3S, it was pretty stable. Once when it did get a little less stable, drifting and bobbing I performed an IMU Calibration and it was rock solid again. Now it seems no matter how many times I calibrate on a level surface, etc. it still drifts several feet and goes up and down a few feet. I always calibrate the compass and am careful to keep metal, watches, cell phones, etc. away from the P3S when I do.
There also seems to be a new whining noise that I don't recall having when it was new. Changed props twice to be sure it wasn't something the props were causing. Not sure if that is related to the stability and no idea what to do about it anyway. I am going to order the stuff needed to balance the props, but from other posts, this may or may not help.
Any other suggestions?
Thanks,
There also seems to be a new whining noise that I don't recall having when it was new. Changed props twice to be sure it wasn't something the props were causing. Not sure if that is related to the stability and no idea what to do about it anyway. I am going to order the stuff needed to balance the props, but from other posts, this may or may not help.
Any other suggestions?
Thanks,