Phantom 3 SE centerboard replacement

[Alle_Mors]

Hi everyone, recently I had an ESC problem with my P3SE so I bought a new centerboard in order to replace the old one but i noticed that the two codes on the top of the new one are different from the ones on the other; is it a problem? should I replace it anyway or you think that it may cause problems?

 

[MotorCycle-Man]

Alle just what do you mean By "Codes"......it might be a very good idea to take a picture of the codes on both main boards and then post them here on your thread and wait for a proper answer...!

 

[Alle_Mors]

The second one si the new motherboard

 

[With The Birds]

They both look like SE boards from what is depicted in the photos, no shielding cover and absence of SMD components ordinarily fitted to the P3S boards. Wouldn’t be a surprise to lean numbers change during production. Check with the supplier to be 100% and ask for an assurance you can return it if it’s the wrong part.

 

[With The Birds]

Alle just what do you mean By "Codes"......it might be a very good idea to take a picture of the codes on both main boards and then post them here on your thread and wait for a proper answer...!

I think that’s the right answer right there...

 

[Alle_Mors]

They both look like SE boards from what is depicted in the photos, no shielding cover and absence of SMD components ordinarily fitted to the P3S boards. Wouldn’t be a surprise to lean numbers change during production. Check with the supplier to be 100% and ask for an assurance you can return it if it’s the wrong part.

Ok, thank you so much for your answers