Phantom 3 Advanced no FPS video settings!?

[camcoptero]

Hi,
Each time I select video size in the dji go app the app crashes. When I try again I get to the video settings but I only see three options, 4k, 1080 and 720. No fps options. My default is 1080 24fps. I have reinstalled the app several times without success. I own a mini ipad with ios 9 os. What can be done? Your help would be trully appreciated. Thanks in advanced!

 

[Petes_DJI_P3]

I'm having same issue on iPad mini 2. Go app crashes when I select the "video size" settings option. I found another thread on the DJI support forum here:
DJI Forum|Just 3 video size options from dji go app no fps

I tried resetting the app to factory defaults and reinstalling the app but made no difference, same issue.

Hopefully there will a fix for this soon.

P

 

[jamespb78]

If you have the p3 Advanced model, and you are seeing the option for "4K" video - then to me that says the App is not connected to your aircraft - as if it had, it would realize the p3A can't do "4K" video, and therefore not give you that option.

When I connect the app to my p3A there is no "4K" option for video, only "2.7k". Yet, if I run the app and DONT connect it to the p3A, I then see the option for "4K".



Sent from my iPad using PhantomPilots mobile app

 

[camcoptero]

Thanks guys, good news. I changed my copter mini SD card to a 64 GB size and now my dji go app video default changed to 1080 60 fps. That's enough for me.

 

[samsea1]

I'm having same issue on iPad mini 2. Go app crashes when I select the "video size" settings option. I found another thread on the DJI support forum here:
DJI Forum|Just 3 video size options from dji go app no fps

I tried resetting the app to factory defaults and reinstalling the app but made no difference, same issue.

Hopefully there will a fix for this soon.

P

I found a workaround for this problem. if you re-link the controller to the copter it will allow you to change the video settings.(you will have to re link everytime you want to change the settings)---after you shut down the copter you will be stuck with that change unless you re link----but is does work and will allow you to change the setting

 

[samsea1]

here is a video of how to re link. hope this helps

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies