- Joined
- Jan 29, 2017
- Messages
- 59
- Reaction score
- 9
I recently sold my babied phantom 3 advanced through eBay. I used iPhone 6s plus with the controller and Litchi app mostly(very rarely the DJI app). Before I packed the drone, it worked well without any issue.
So now the buyer is using an Android phone and DJI GO app, he has issues with firmware update. He was able to update the aircraft firmware successfully. Then, the remote controller blinks red and green it seems.
I shared him this video:
And this is his response:
"well the transmitter will not go into update mode like the video link states. went fine for the drone but not working at all for the transmitter.
The video showed to drop the Bin file onto the micro SD card then insert the card into the drone. Then wait for the drone to upload the file about 20 min or until the beeps change then power down and remove the MicroSD card. Check the txt file that it states success and it did.
Then it states to erase the txt file but leave the BIN file and se a Micro SD to USB adapter to update the controller. When I try to do that it will not upload to the controller. The light stays red and does not flash blue then after about 5 min the controller just starts beeping then shuts off after 10 min.
is there a different way to update the controller?"
I am not that technical with these drones so I am unable to assist him further. Can some expert here please help? Highly appreciate your help here.
So now the buyer is using an Android phone and DJI GO app, he has issues with firmware update. He was able to update the aircraft firmware successfully. Then, the remote controller blinks red and green it seems.
I shared him this video:
And this is his response:
"well the transmitter will not go into update mode like the video link states. went fine for the drone but not working at all for the transmitter.
The video showed to drop the Bin file onto the micro SD card then insert the card into the drone. Then wait for the drone to upload the file about 20 min or until the beeps change then power down and remove the MicroSD card. Check the txt file that it states success and it did.
Then it states to erase the txt file but leave the BIN file and se a Micro SD to USB adapter to update the controller. When I try to do that it will not upload to the controller. The light stays red and does not flash blue then after about 5 min the controller just starts beeping then shuts off after 10 min.
is there a different way to update the controller?"
I am not that technical with these drones so I am unable to assist him further. Can some expert here please help? Highly appreciate your help here.