Phantom 3 advance bit rate

[micheledip]

Using litchi not sure if it's auto in dji go what a good bit rate to use for good live stream between phantom and iPad so still have good quality but not much lag

Thanks




Sent from my iPhone using PhantomPilots

 

[RC Madman]

6mbs. Is what I use and it seems to work well.

 

[micheledip]

Ok thanks for that is it auto on go app I'll check later


Sent from my iPhone using PhantomPilots

 

[Oso]

Ok thanks for that is it auto on go app I'll check later

Sent from my iPhone using PhantomPilots

A reminder that your P3A's downlink bitrate is capped at around 2Mb/s and it will not be higher than that even if you set that slider in GO to something higher.

 

[kirk2579]

A reminder that your P3A's downlink bitrate is capped at around 2Mb/s and it will not be higher than that even if you set that slider in GO to something higher.

I agree
the p3adv is limited to 2 mbs video stream by fw.

only the p3pro actually responds to the slider and will go to 10.
I stay at 4mbs for distance and quality ...

 

[micheledip]

thanks for that

 

[bluntnose]

Yoicks, and I thot 4K was the only reason to move up. Anything else I'm missing with my p3a?


Sent from my iPhone using PhantomPilots

 

[micheledip]

In litchi I can select any bit rate but it locks onto a channel if select auto channel it moves the bit rate around


Sent from my iPhone using PhantomPilots

 

[Oso]

In litchi I can select any bit rate but it locks onto a channel if select auto channel it moves the bit rate around


Sent from my iPhone using PhantomPilots

You can select a bit rate, but with a P3A it never exceeds about 2Mb/s no matter what you choose. A P3A is not able to go any higher than that for the downlink video.

A P3P on the other hand is able to go to ~10Mb/s for the downlink.

 

[micheledip]

[emoji106]


Sent from my iPhone using PhantomPilots

 

[RC Madman]

Well that would explain why I did not notice a difference. Thought it was my aging eyes.