Phantom 3 4K distance issue!!!

[absaryounis]

Hi guys, hope you're well

Im a fairly new owner of a DJI phantom 3 4K which operates over wifi and I have already gained increasingly sick of the distance this will travel too or should I say lack of

Flew it today over a field and it didn't even go very high and it constantly kept saying "no signal" and losing connection via the camera on the screen. So I had the drone floating in the air and the screen claiming there was no connection with the aircraft

Scales were calibrated and latest update was installed a week ago.

Any ideas as to what might be the issue? Regret being a tight and getting this now!!! Should have bitten the bullet and got a professional instead

I have uploaded an example of the distance travelled with constant loss of signal warnings please advise. If you cannot view via the link pop over to my Instagram @absaryounis thanks

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Sent from my iPhone using PhantomPilots mobile app

 

[nix240z]

check the 8 pin connector cable on the gimbal, I had similar problem on my Pro and one of the 8 pins had worked its way out of the connector a tiny bit

 

[gklugie]

RE-Bind the controller to the phantom.

 

[Alan Russel]

Your loss of signal could be caused by interference, try flying the bird in a different area away from buildings, electricity wires etc..good luck!