Hi All,
I have recently updated the firmware on my P4. It was having similar problems to many other P4 pilots after doing the firmware updates. Poor image, green and sometimes purple screen, sometimes the bottom half is solid green, gives warning of weak signal etc. The drone is on the latest firmware for everything including using a new iphone X and the latest app version. Now the big issue is when I turn everything on at the desktop, I get a clear image from the camera to the iphone but I do not have the solid green status light on the RC. With all the research,its indicating the RC is not linked to the drone. So I performed the linking RC (a few times), I downgraded the firmware on the RC and then reconnected to wifi, turned everything on and it immediately told me I needed to upgrade the firmware for the RC. So I updated the RC firmware again and the same thing. No status light on the RC but its obviously linked because all the functions work. I can pan the camera left/right, I can power up the drone (no props - inside), throttle up and move both sticks and all appears to work as it should. I can take photos but when I go to take a video another problem starts. The camera pans full left and then slowly pans back to centre and the video link goes all crazy with the green screen, fuzzy lines, weak signal message etc.
I am reluctant to take it outside and fly given these issues.
I have tried different lightning cables (3 including 1 brand new apple), I have tried 3 different SD cards (2 x 8gb sandisk and 1 16gb)
Has anybody has this problem?
thanks Rob
PS thanks for all the help with my P3P. I installed a new gimbal motherboard and its flying great.
I have recently updated the firmware on my P4. It was having similar problems to many other P4 pilots after doing the firmware updates. Poor image, green and sometimes purple screen, sometimes the bottom half is solid green, gives warning of weak signal etc. The drone is on the latest firmware for everything including using a new iphone X and the latest app version. Now the big issue is when I turn everything on at the desktop, I get a clear image from the camera to the iphone but I do not have the solid green status light on the RC. With all the research,its indicating the RC is not linked to the drone. So I performed the linking RC (a few times), I downgraded the firmware on the RC and then reconnected to wifi, turned everything on and it immediately told me I needed to upgrade the firmware for the RC. So I updated the RC firmware again and the same thing. No status light on the RC but its obviously linked because all the functions work. I can pan the camera left/right, I can power up the drone (no props - inside), throttle up and move both sticks and all appears to work as it should. I can take photos but when I go to take a video another problem starts. The camera pans full left and then slowly pans back to centre and the video link goes all crazy with the green screen, fuzzy lines, weak signal message etc.
I am reluctant to take it outside and fly given these issues.
I have tried different lightning cables (3 including 1 brand new apple), I have tried 3 different SD cards (2 x 8gb sandisk and 1 16gb)
Has anybody has this problem?
thanks Rob
PS thanks for all the help with my P3P. I installed a new gimbal motherboard and its flying great.
Last edited: