I have not flown my P3S, as of yet. I bought it used and it appears to be in really good condition. I wanted to read, and reread everything I could about the aircraft before I took it up. I decided to confirm that the controller is calibrated correctly. When I go to the calibration screen on the app, it tells me to center the sticks then click start. I have tried that several times and it keeps telling me to center the sticks and click start. The sticks are centered, as best I can tell, as they each have a centered "detent" feeling. Any suggestions as to where I go from here? Do I just assume the controller is calibrated, at least until I fly it and see if it needs any tweaking or fine tuning ( I can't think of the word used in smaller, cheaper drones when encountering a drift or yaw issue, so I settled for tweaking and fine tuning. I an sure you know what i mean) Any and all help is appreciated.
P3S controller calibration problem
- Thread starter Stanbur
- Start date
msinger
Approved Vendor
- Joined
- Oct 30, 2014
- Messages
- 32,280
- Reaction score
- 10,985
- Location
- Harrisburg, PA (US)
- Website
- phantomhelp.com
Yeh I get same about centre sticks but just go ahead and press start and don't forget to do gimble wheel and press done when complete or won't save,,,,,after this is done it should not need no tweaking to any settings,,,,it will ask you to turn drone off while this being done and then restart it
Great news. I put in a new SD micro card and went through the processes again and everything worked just as per the videos and instructions. Thanks to all for the assistance and advice, it is really appreciated. All I need now is some good weather and a little free time, together. Thanks again y'all.
Similar threads
