Hello,
I am a P1, P2 and now a P3 user.
Here I have my new, just unboxed P3 Prof.
Here are steps I've done after unboxing
I use DJI Go in an iPad 2 mini.
Charged battery and RC.
Opening the app the first time I got a warning 'upgrade firmware'.
I tapped that line and a progress bar downloading a firmware showed up.
I saw a blue led in RC.
Finishing that it still displays three warnings about upgrading the aircraft, RC and battery.
I went to DJI P3 downloads and got P3S_FW_V01.03.0020.bin I copied to the micro SD card I previously formated from the aircraft.
I followed pdf instructions and turned P3 on (not the RC). It starts as usual and after checking its system camera light remains off while rear lights blink yellow quickly (because there's no RC connection)
So firmwares are not performed. I remember that some settings I've changed before the upgrade from the app where reset to their defaults after that. So it seems something has been upgraded but those three warnings remain.
Seems like I've first upgraded the RC according to the pdf enclosed in the firmare.zip file. I got it after I saw more firmware updates warnings.
If the first time I build the system, the app presents me a way to update firmwares (tap and go) it is supposed (I'm not a diviner) I have to be warned about first downloading and running the aircraft firmware and then tapping the 'update firmware' link.
I also got some know bugs testing recording videos and taking photos: sudden No Signal, no video feed to the screen.
What can I do?
Thanks,
M
I am a P1, P2 and now a P3 user.
Here I have my new, just unboxed P3 Prof.
Here are steps I've done after unboxing
I use DJI Go in an iPad 2 mini.
Charged battery and RC.
Opening the app the first time I got a warning 'upgrade firmware'.
I tapped that line and a progress bar downloading a firmware showed up.
I saw a blue led in RC.
Finishing that it still displays three warnings about upgrading the aircraft, RC and battery.
I went to DJI P3 downloads and got P3S_FW_V01.03.0020.bin I copied to the micro SD card I previously formated from the aircraft.
I followed pdf instructions and turned P3 on (not the RC). It starts as usual and after checking its system camera light remains off while rear lights blink yellow quickly (because there's no RC connection)
So firmwares are not performed. I remember that some settings I've changed before the upgrade from the app where reset to their defaults after that. So it seems something has been upgraded but those three warnings remain.
Seems like I've first upgraded the RC according to the pdf enclosed in the firmare.zip file. I got it after I saw more firmware updates warnings.
If the first time I build the system, the app presents me a way to update firmwares (tap and go) it is supposed (I'm not a diviner) I have to be warned about first downloading and running the aircraft firmware and then tapping the 'update firmware' link.
I also got some know bugs testing recording videos and taking photos: sudden No Signal, no video feed to the screen.
What can I do?
Thanks,
M
Last edited: