P2+ TX Mod with Inspire1 tab mount

[dirkclod]

So what's that called ?

I don't have a link but here's the quote on it Mori

Ordered it from Summit Racing. It's part ALL18548. I think I should be receiving 2 in the pack, which cost me $11 ($6 of which was shipping).

 

[fordruid]

Has anyone tried this mount for P3S? Just ordered one for 14.99

 

[Mori55]

Ended up going to hardware store and getting a nut sett and tool for installing. About 7.00.

 

[dirkclod]

Ended up going to hardware store and getting a nut sett and tool for installing. About 7.00.

How ya like it ?

 

[Mori55]

Great !!!

 

[Dirty Bird]

Nice job!

 

[battman2036]

Has anyone tried this mount for P3S? Just ordered one for 14.99

Now these things are all over ebay for about $8. Have to see if my holder will mount to it when I get home

 

[dmark1867]

Has anyone tried this mount for P3S? Just ordered one for 14.99

Did you try it on your P3S yet? If so how do you like it and what size tablet are you using? Thanks

 

[fordruid]

Love it with Ipad mini 2 and Verizon Ellipsis 7

 

[dmark1867]

Love it with Ipad mini 2 and Verizon Ellipsis 7

Do you think it feels sturdy enough to hold something with a 10" screen?

 

[fordruid]

Depends on its weight but I think so.

 

[dmark1867]

Do you think it feels sturdy enough to hold something with a 10" screen?

The one I was looking at is a bit heavy at 1.2 pounds, I guess I could try it?
Which mount are you using with it to mount your tablet?
Thanks!

 

[fordruid]

stock Phantom 3 adv/pro mount

 

[dmark1867]

stock Phantom 3 adv/pro mount

Ok, then I guess this would be it?
DJI Phantom 3 Part #38 Mobile Device Holder -US dealer

I was looking at going with something like this:
Amazon.com: Square Jellyfish Metal iPad Air Tripod Mount: Cell Phones & Accessories

I suppose either would work? Thanks for the information

 

[fordruid]

First one is what I used. Not sure how second would attach.

 

[Bryonheath]

Will the holder hold a standard iPad with otter box?


Sent from my iPhone using PhantomPilots mobile app

 

[fordruid]

Opens to 6 1/2 inches

 

[hot dog]

Guys...I've got the I1 mount, but, I'm hesitant to drill the hole. That baby, to use the technical term, has to be "dead nuts on".
Has anyone been off so far as to have the bracket not fit?
What's a good method to lay out that hole?
I'm looking forward to any help you can give.

Hot Dog....

 

[G-unit]

Guys...I've got the I1 mount, but, I'm hesitant to drill the hole. That baby, to use the technical term, has to be "dead nuts on".
Has anyone been off so far as to have the bracket not fit?
What's a good method to lay out that hole?
I'm looking forward to any help you can give.

Hot Dog....

You can lay it on its side the aluminum mount that is, line up the eyelet hole then mark each side of the bolt that goes in the Tx, the center of the two marks will be the center of your hole. hope that helps??

 

[hot dog]

You can lay it on its side the aluminum mount that is, line up the eyelet hole then mark each side of the bolt that goes in the Tx, the center of the two marks will be the center of your hole. hope that helps??

Thanks, I'll give that a try. Only get one chance.
If not quite right...oh well.