Old drone, new pilot, new crash, new crash course in learning the ropes

[waterwin]

In the folder dji.pilot.pad\LOG\CACHE\ I find 360 log files and 52 txt files.
The txt files are directly understandable and have information like : dataFlycDetection.getIsSetUUID()=true
The log files can be read but all start with GmcONIA9PFzHw1gpPLLPoqev3ytAH5KO3S/CJpMsylg=
and the rest is the same kind of mumbo jumbo.

I tried changing the .log extension to .dat and .txt for input in DatCon and CsvView

and got these errors

DatCon (.dat)
createDatFile invalid header - proceeding
Aircraft type unknown: Assuming 4 cellls per battery
Total Error Ratio 100,34%
Reverting to simple time axis processing becasue
not enough valid GPS data exists before the 1st rollover


CsvView (.txt)
Using TXTlogToCSVtool
Internal Error

 

[BudWalker]

In the folder dji.pilot.pad\LOG\CACHE\ I find 360 log files and 52 txt files.
The txt files are directly understandable and have information like : dataFlycDetection.getIsSetUUID()=true
The log files can be read but all start with GmcONIA9PFzHw1gpPLLPoqev3ytAH5KO3S/CJpMsylg=
and the rest is the same kind of mumbo jumbo.

I tried changing the .log extension to .dat and .txt for input in DatCon and CsvView

and got these errors

DatCon (.dat)
createDatFile invalid header - proceeding
Aircraft type unknown: Assuming 4 cellls per battery
Total Error Ratio 100,34%
Reverting to simple time axis processing becasue
not enough valid GPS data exists before the 1st rollover


CsvView (.txt)
Using TXTlogToCSVtool
Internal Error

The "Total Error Ratio 100,34%" is an indication that DatCon couldn't make any sense of the .DAT. Perhaps I should be a bit more direct. DatCon will not work for any of these files you are asking asking about.

When CsvView is given a file with the .DAT extension CsvView will use DatCon to create a .csv that CsvView then presents to the user. .Txt log files created by the Go App will be translated internally by TXTlogToCsvtool to a .csv.