Crashed my Vision Plus into the river, totally user error. I am a *******.
Fished it out, dried it out per all of the conventional wisdom. Recovered the SD card (awesome video by the way)
The good news:
Camera, gimbal, FPV, GPS are all functioning normally. Captures clear photo and video. Good FPV signal to phone, shows good telemetry.
The bad news:
No signal from remote to Phantom. Motors don't fire up. Getting "Configuration Error" message.
I imagine main controller on the board is toast. Before I drop 229 on controller, can anyone help me diagnose if this is the real problem.
Thanks
Fished it out, dried it out per all of the conventional wisdom. Recovered the SD card (awesome video by the way)
The good news:
Camera, gimbal, FPV, GPS are all functioning normally. Captures clear photo and video. Good FPV signal to phone, shows good telemetry.
The bad news:
No signal from remote to Phantom. Motors don't fire up. Getting "Configuration Error" message.
I imagine main controller on the board is toast. Before I drop 229 on controller, can anyone help me diagnose if this is the real problem.
Thanks