Thanks bro, you're always here when I need you.1.3.2
How do we go about updating the RC firmware? does it do it through the app?1.3.2
How do we go about updating the RC firmware? does it do it through the app?
The firmware update for the bird was quite different than the P2V+ I had, so I'm confused on the RC
Thank you
It depends what firmware you going from - and what firmware your going to. However... you can update by putting the firmware in the root of a usb stick and putting the stick in the controller and turning it on. That is how I got my controllers to 1.3.2
Wait, I think I figured it out. So I downloaded firmware 1.3.2, stick on a USB flash drive, plug it into the RC.It depends what firmware you going from - and what firmware your going to. However... you can update by putting the firmware in the root of a usb stick and putting the stick in the controller and turning it on. That is how I got my controllers to 1.3.2
Wait, I think I figured it out. So I downloaded firmware 1.3.2, stick on a USB flash drive, plug it into the RC.
Then what? Just Power the RC on? What led colors or beeps should I look out for when it is updating, and when it is done?
Sent from my SM-G900P using Tapatalk
strange...nothing happens when I do this...and I know i didnt update the firmware correctly for the RC@ImJim,
I only have used the bird to update my radio controller.
With the firmware on the micro sd card, insert into the gimbal.
Plug the radio into the Phantom with the supplied cable.
Turn on the bird first, then radio controller and let them do their thing. Works like a charm.;-)
Enjoy your Phantom, and happy landing.
RedHotPoker
strange...nothing happens when I do this...and I know i didnt update the firmware correctly for the RC
how do you check the firmware version for the RC?