Hi All, I hope everyone had a nice Christmas. I took my P4P2+ out for a fly yesterday. The first flight was fine. At the startup of the second flight I recieved a message the Gimbal Motor Overload, also the mapbox was missing in the controller display (Plus controller). Probably two unrelated issues. I do have the "radar" type display in the mapbox area. I did update to the most recent firmware update prior to flying. I have since calibrated the gimbal, imu and controller with no luck. The gimbal appears to to be steady, moves fine with no restrictions and has no resistance when moved manually. The videos are fine with no shaking or wobbling. I have reviewed previous posts regarding Gimbal Motor Overload and my gimbal does not appear to have any of the issues discussed in the posts. Any suggestions on either or both issues is most welcome.