I was working on soldering the battery leads into the board (this was the last thing I had to do of course) and after making the GND connection, I was working on getting the positive side in place and accidently popped the ground off the board. It pulled the wire and solder completely off. Just looked like a flat gray pad there.... Took me a sec to get solder to stick to the pad again but I got it to take and redid the connection. Everything powers up, and I juggled the GND wire with no change, just concerned I may have messed it up and affected the reliability of the connection. [POUTING FACE]
Thoughts?
Thoughts?