Hello all, i'm daily new to the drone world and i've crashed my phantom 3 standard. When the crash happened it fell about 40ft out of the sky onto mid high grass. It landed upside down. After inspecting the body I noticed i cracked the front left leg but all wires were still in tact. I fired it back up and now none of the motors start when try to take off. The LED light indicators are normal (solid red in the front and medium blink yellow in the rear). I decided to take off the top shell and inspect each motor. All still spin as they are supposed to. Everything looks normal under the body except for the GPS module that connects from the top shell on the board is disconnected. I would assume that only affects the GPS. I'm not sure what to do now. I've recalibrated the IMU and reset majority of things trying to see if it will fix the problem. Here's a video of my issue.
Dropbox - IMG_1193.MOV.mov
Dropbox - IMG_1193.MOV.mov