Camera view goes away at 300 ft

[spaceout_02]

So I put new upper and lower plastic on my phantom 3 standard, everything works great however now my camera cuts out at 300ft.. If I fly away from me or straight up I no longer get camera signal/or view after 300ft. What did I change or what am I missing? Thanks

 

[bobmyers]

So I put new upper and lower plastic on my phantom 3 standard, everything works great however now my camera cuts out at 300ft.. If I fly away from me or straight up I no longer get camera signal/or view after 300ft. What did I change or what am I missing? Thanks

Sounds like the Lightbridge video signal is not working properly. Could be a bad or loose connection on an antenna wire-- did you do a complete shell replacement?

 

[dirkclod]

Sounds like the Lightbridge video signal is not working properly. Could be a bad or loose connection on an antenna wire-- did you do a complete shell replacement?

No Lightbridge bob . 2.4 and 5.8
Sounds like something in your setting's in app . check those .
Welcome to the forum

 

[spaceout_02]

It worked perfectly up until my shell replacement, it was a complete replacement top and bottom. Video signal is great and works as before up until that 300ft. What in my settings could be off? Thanks guys

 

[RodPad]

Are you saying it goes from 100% to 0% and comes back like at 250'? I was getting message of low image signal last night but moving the remote at different angle it would come right back in.