Hello Mattro,
As stated above, you can use dial wheel controller on the vision non plus model. BUT
you must do a few things first!
There is also another option, for a 7th channel mod, to your original vision ( non dial wheel controller ) using a small lever ( sold on eBay ) , but must be enabled to work. ( look up 7th channel mod, on YouTube, lever kits are only a couple bucks. )
Ok
Let's bind your dial wheel to your vision.
First
You must hook controller to ( RC ASSISTANT ) pc software, to do a FULL CALIBRATION, ( BOTH sticks, BOTH toggles, and Dial wheel )
This will calibrate Tx ( controller ) back to factory specs.
Next,
Turn on ONLY BIRD, PRESS red button on belly of bird, turn on Tx, should link automatically.
Ok ( now Tx is calibrated )
We need to hook p2v to ( PC ASSISTANT ) pc software, then under BASIC tab, then RC tab, make sure you click ( UPGRADE CONTROLLER ) this will enable dial wheel, then do a full calibration here as well, BOTH sticks, S1 toggle ( phantom mode ), or BOTH toggles ( naza mode ), and finally Dial wheel.
( this will calibrate Tx to phantom vision.
Now dial wheel should work with camera pitch on p2v non plus craft.
Hope this helps.
May I ask what is damaged on your plus craft?
J Dot