$250~3DPOWER Brushless Gimbal Mount DJI Phantom 2 Vision
- Thread starter Brew
- Start date
Noël said:
Well, since the gimbal isn't dead weight, but consumes power as well, that must be a rule of thumb at best
a 3-axis gimbal that weighs the same as the 2-axis RotorPixel would consume more power (one extra motor) therefore resulting in lower flight time? Sluggish gain values on the P2V would mean the gimbal must work harder to stabilize, therefore consuming more power?
TheFlyingSentinel said:
Yes, I posted that link in the MotorPixie section on saturday. I contacted Marcus who drew the thing, and you can download the source files from his homepage http://www.stoeckli.net
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs
DKDarkness said:TheFlyingSentinel said:
Yes, I posted that link in the MotorPixie section on saturday. I contacted Marcus who drew the thing, and you can download the source files from his homepage http://www.stoeckli.net
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs
DK do you know were I could buy just the camera mount for the p2v camera I have seen loads of 3D ones like the one above but cant fine any were to buy one that's the only part I am missing for the gimbal i am doing some mods to for the p2v have look on youtube and have seen the way some people have done it but the 3D camera mount looks the best way to go
shaun27 said:DKDarkness said:TheFlyingSentinel said:
Yes, I posted that link in the MotorPixie section on saturday. I contacted Marcus who drew the thing, and you can download the source files from his homepage http://www.stoeckli.net
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs
DK do you know were I could buy just the camera mount for the p2v camera I have seen loads of 3D ones like the one above but cant fine any were to buy one that's the only part I am missing for the gimbal i am doing some mods to for the p2v have look on youtube and have seen the way some people have done it but the 3D camera mount looks the best way to go
I guess you could download the according STL file and have shapeways.com print it for you?
I'm back in business again as I just received the new 3D parts for my broken Taco gimbal!
It looks like some changes have been made tot he camera holder as it does hold the camera way better than before!
(it is now holding the camera without the Velcro strap)
Will report back when it's up and running again.
It looks like some changes have been made tot he camera holder as it does hold the camera way better than before!
(it is now holding the camera without the Velcro strap)
Will report back when it's up and running again.
- Joined
- May 19, 2013
- Messages
- 85
- Reaction score
- 0
Interesting build - I have a bit of uncertainty as to the necessary additional components.shaun27 said:DKDarkness said:TheFlyingSentinel said:CHECK THIS OUT !
http://www.thingiverse.com/thing:278267
Yes, I posted that link in the MotorPixie section on saturday. I contacted Marcus who drew the thing, and you can download the source files from his homepage http://www.stoeckli.net
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs
DK do you know were I could buy just the camera mount for the p2v camera I have seen loads of 3D ones like the one above but cant fine any were to buy one that's the only part I am missing for the gimbal i am doing some mods to for the p2v have look on youtube and have seen the way some people have done it but the 3D camera mount looks the best way to go
I guess you could download the according STL file and have shapeways.com print it for you?
Is this the correct configuration/socket for the P2V 4-conductor camera cable?
What controller? IMU? TIA
shaun27 said:DKDarkness said:TheFlyingSentinel said:
Yes, I posted that link in the MotorPixie section on saturday. I contacted Marcus who drew the thing, and you can download the source files from his homepage http://www.stoeckli.net
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs
DK do you know were I could buy just the camera mount for the p2v camera I have seen loads of 3D ones like the one above but cant fine any were to buy one that's the only part I am missing for the gimbal i am doing some mods to for the p2v have look on youtube and have seen the way some people have done it but the 3D camera mount looks the best way to go
You mean this?
http://www.taco-rc.com/servlet/the-35/3 ... ell/Detail
http://www.goodluckbuy.com/dji-phantom- ... 3-fpv.html
If you need the entire harness? Maybe combine the two and have gimbal for go pro and fc200.
If you need the entire harness? Maybe combine the two and have gimbal for go pro and fc200.
Yes, I posted that link in the MotorPixie section on saturday. I contacted Marcus who drew the thing, and you can download the source files from his homepage http://www.stoeckli.net
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs[/quote]
DK do you know were I could buy just the camera mount for the p2v camera I have seen loads of 3D ones like the one above but cant fine any were to buy one that's the only part I am missing for the gimbal i am doing some mods to for the p2v have look on youtube and have seen the way some people have done it but the 3D camera mount looks the best way to go[/quote]
You mean this?
yes I seen just after I posted have order one but thanks
http://www.taco-rc.com/servlet/the-35/3 ... ell/Detail[/quote]
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs
[/quote]DK do you know were I could buy just the camera mount for the p2v camera I have seen loads of 3D ones like the one above but cant fine any were to buy one that's the only part I am missing for the gimbal i am doing some mods to for the p2v have look on youtube and have seen the way some people have done it but the 3D camera mount looks the best way to go[/quote]
You mean this?
yes I seen just after I posted have order one but thanks
http://www.taco-rc.com/servlet/the-35/3 ... ell/Detail[/quote]
shaun27 said:Yes, I posted that link in the MotorPixie section on saturday. I contacted Marcus who drew the thing, and you can download the source files from his homepage http://www.stoeckli.net
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs
DK do you know were I could buy just the camera mount for the p2v camera I have seen loads of 3D ones like the one above but cant fine any were to buy one that's the only part I am missing for the gimbal i am doing some mods to for the p2v have look on youtube and have seen the way some people have done it but the 3D camera mount looks the best way to go[/quote]
You mean this?
yes I seen just after I posted have order one but thanks
http://www.taco-rc.com/servlet/the-35/3 ... ell/Detail[/quote][/quote]
Or, you can have 'Shapeways' print the design above.... just download files, then submit to shapeways
$25 for vision holder printed by Shapeways..... plus shipping... great price.DKDarkness said:TheFlyingSentinel said:
Yes, I posted that link in the MotorPixie section on saturday. I contacted Marcus who drew the thing, and you can download the source files from his homepage http://www.stoeckli.net
Seems to be a very nice guy, he might update the design to include a better IMU holder and move the controller to the back, so keep following his designs
Hi Noel, or some of you all,
can you please post me also, how you set up your gimbal in detail? The parameters you have set in the GUI, please?
Greetings Walter from Austria
can you please post me also, how you set up your gimbal in detail? The parameters you have set in the GUI, please?
Greetings Walter from Austria
Hello, i've assitited all forum...and i have a phantom 2 vision too... today i sent a email to taco and they said that the gimball works now with phantom batery and is plug n play...do you confirm? i need...a GIMBAL...just like everyone P2V owner....
Dear all 3DPower Gimbal owners,
I just try to setup the old/existing version of 3DPower Gimbal but the Roll trembles/shakes a lot when I try to move to
side by side limits.
Could I reduce the shaking by adjusting SimpleBGC GUI ? but I could not find a valid download of
GUI2.2b2.
Even the link given by Tacotoy does not work.
Any one has a link to down this GUI v2.2b ?
Raymond
I just try to setup the old/existing version of 3DPower Gimbal but the Roll trembles/shakes a lot when I try to move to
side by side limits.
Could I reduce the shaking by adjusting SimpleBGC GUI ? but I could not find a valid download of
GUI2.2b2.
Even the link given by Tacotoy does not work.
Any one has a link to down this GUI v2.2b ?
Raymond
Raymond.HK said:
The SimpleBGC is made by BaseCam Electronics.
http://www.basecamelectronics.com/downloads/8bit/
Direct download: http://www.basecamelectronics.com/files ... _2_2b2.zip
Similar threads
