“IMU Initialization Failed” and “Barometer Error”

[NattyStites]

I landed the drone to swap batteries. After powering up got this message. Took apart the drone and tapped the imu but same thing. Has anyone found a solution for this? Should I replace the imu? Are they available? This is a professional.

 

[MotorCycle-Man]

Is the drone new or under warranty.....IF its new go get a exchange and if its some place in its warranty...you will get a better idea from some body for what to do here then to go replacing parts that are not bad !

 

[NattyStites]

Is the drone new or under warranty.....IF its new go get a exchange and if its some place in its warranty...you will get a better idea from some body for what to do here then to go replacing parts that are not bad !

No, I've owned it almost two years.

 

[markonis]

Had exactly same problem after a battery change. Reloaded latest firmware, open the cover and tapped on the imu unit, still error persists so I took it in today for repairs. P3P

 

[NattyStites]

Had exactly same problem after a battery change. Reloaded latest firmware, open the cover and tapped on the imu unit, still error persists so I took it in today for repairs. P3P

Please let me know how your problem works out. I experimented with my aircraft on my own and didn't get anywhere. I bought a replacement IMU which did nothing. I have consented to send mine in for repair but have been busy with work and have not got around to it.

 

[Manny1410]

People you guys needed to turn off the aircraft and waiting for the temperature going down a lease 30° maybe the aircraft is a little bit hot and the battery too my opinion put your aircraft in a good balance in the ground waiting for the temperature and turning on back do the IMU Calibration first second calibrating the aircraft and 3 calibrated the gimbal is working trus me

 

[Manny1410]

If u guys waiting an hour is better the aircraft is totally cool

 

[latitant2]

Salve ho lo stesso problema su un p3p, qualcuno ha risolto? Imu initialization error e barometer error. Ho provato a cambiare imu ma stesso errore. Se faccio calibrazione imu la completa ma non risolvo