Hello everyone...
Quick question. Earlier today, I updated the Firmware to 1.6 (the most recent release) for my Batteries and updated the RC to 1.5 (it's most recent) update. Took the Phantom up to test it to an altitude of 20 feet and let it hover. After about a minute or so, it started to...
Greetings everone. I haven't flown my P3pro in a few months (since the new DJI GO app update) and when I hooked it up to check on things I noticed that it does not give me the option to connect to camera.
I know I do need to update the firmware on the aircraft/remote, but would this cause the...
I replaced the SD card on the phantom's camera (larger capacity). Now I've been reading a few posts here and there about the firmware being on the SD card. Which one? Is it the SD card that's "hard to remove" in the battery compartment, or the one on the camera? I purchased a new battery as...
the P3 initialization would not permit launch when a update firmware popped up.
the required firmware was loaded and the initialization verified and proceed to the launch. but then a new error ESC error appeared.
the firmware has been reloaded
a new board has been installed
motors replaced...
Running 2.4.2 for DJI GO and 1.3.2 firmware. I'm a newbie .. just got bird Monday (haven't flown yet 70mph winds here in the Rockies) Do I need to install 1.4 first or can I go straight to 1.5?
I have been trying to update my firmware on my remote. I presently states I am running 1.18
I have gone through all of the various approaches to get the file onto the remote with no success.
1. USB card reader
2. thumb drive
3. Cable connected to aircraft.
Any help is greatly appreciated.
ok what is the best firmware for advanced p3 short of the current one. im having alot of issues with video cut out even at short range,with this version.Or is it the pilot app causing the issue I have ipad air2,and Iphone6s+
one with 2.2.0 and one with 2.3.0 the latter 2.3.0 seems worse but has...
GoPro has disabled the usb video out for the 3 and 4 cameras in their latest firmware release. So, if you use your GP for fpv flying and get the video feed from the usb port this latest update will no longer allow you to get the video to your fpv transmitter. According to GoPro themselves...
Hi!
This is my first post here and don't want to write anything negative to start with :)
..just some lessons learned ;)
I got my P3S just a week ago here in Sweden and finally I'm happy with it - but could have ended up returning it to the seller because of the failed f/w upgrade via the DJ...
GoPro not working after update on Zenmuze H3-3D
I was having some strange recording issues with my GoPro Hero 3+ Silver so I updated it to the latest firmware version that came out in the beginning of September (v3.02). After this the GoPro, while connected to the gimbal with the USB cable...
Having issues since upgrading to the 1.4.10 version of the firmware. Phantom 3 professional
1) after calibrating home position it just lands straight down from wherever it is hovering in P mode and then hitting the return to home button either on the controller or thru the dji app.
2) even...
So I spent most of the day downloading updating and then testing the new Firmware - Here is my take please add yours:
The Go App and the Drone are the only things that had to be updated - The Battery and Controller don't
The update took more than 10 minutes but less than 15 best guess
In all...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.