controller

(The picture at first is of the drone itself for about 5 seconds) Than the rest is narration and video of the modifications made to my controller to return it to a functioning state. The overall point is the outside cover for the on off switch on this particular model of controller is junk...

My controller is blinking green (I think), could be yellow but I'm colorblind. Not red for sure. Beeps constantly about 2 cycles per second along with the blinking controller light next to the 4 batt indicator buttons. I don't see anything like this in the LED Key for the controller from dji...

Firstly it important to understand I am not a noob and have done an awful lot to try to rectify the issues I am getting at the moment since I upgraded last week... 1) The first big change was a black camera view when going on the DJI Go App before 4. Basically what is happening is I boot up...

Asked this over on P3 Std/4k Forum. Received no reply. So, I'll try here. Re the subject, on the top rear of the controller, there is a USB port with an individual cover. If one unscrews the 4 1.5mm hex head screws, the USB board can be seen. There is a single, fairly narrow ribbon cable...

My radio fell and the housing split in half at the seam. This caused the video cable to come loose. Any thoughts on where to get it repaired?

Just updated firmware 11.20 to my P3 pro also updated the controller through the DJI Go app. After completion I receive a "weak remote controller signal" with a black screen> any solutions?

SOLD

Hi Guys, Had a bit of a pour through the forums here, and exhausted what GoogleFu I have, so in short... I just bought a Phantom 3 Standard on eBay, and like a total pratt didn't read the little bit of a footnote that stated it excluded the RC unit and the charger... Now I've found a few...

For some reason when i charge my remote it only gets to 2 blinking lights and after a few minutes it stops charging. I havent been able to find an easy fix or solution other than reaching out to DJI which from what i hear they are not very reliable or helpful. Has anyone found a DIY hack or fix...

Phantom 3 Advanced in mint condition with just over 12 hours. Never been crashed. No stress marks of any kind. Not a scratch on this one as far as I can tell. Never had any issues. Original owner. Phantom 3 advanced only with 8 props (P3A comes in its original box) - $215 + shipping -- SALE...

After a flight a few days ago, I set my drone and rc on my truck bed and my rc fell onto the concrete. Right after I attempted to fly the drone and it would not fly. The s1 switch snapped and now wiggles around, and I also wanted to see if the sticks were messed up. I tried to calibrate the rc...

My Footage is stuck in the cache in the Phantom Controller. We shot sum footage With the phantom 4+ and the footage was not on the card but is stored in the cache in the controller. I tried plugging it into Black magic media express and Adobe premiere nothing will read it. However when I plug it...

I am basically a new P3S pilot, I am based in Australia and have done the Magic Power upgrade (Best thing ever!) The issue I am having, is keeping the controller facing the drone. 1 small movement (like 1cm) will drop my signal from full to zero and vice versa. I do want to upgrade to either an...

Sold

Hi guys, I'm selling my controller and batteries as I crashed and lost my drone. Need to know. Can you sync a controller with another drone? Someone asked me this and I'm not sure. Are they only synced with the drone it ships with? Many thanks

GL-300B Controller for P3Adv/Pro The plastic bracket for the phone/tablet holder has been expertly repaired and is barely noticeable. Most people just replace the plastic bracket anyways if it bothers you, but the bracket is very stable and strong. Stronger than my personal one in fact. The...

I am parting out a Phantom 3 Advanced that has the compass connector broken off the ESC board. Owner tried to open shell and broke it. Drone was flying great prior to him trying to open it up. Powers up and all clear, just gives compass error. 2.7k Camera, Gimbal and mount in excellent shape...

A couple questions about using the Phantom 4 Pro+ for 2d mapping. First off I did not realize that pro+ was limited in app selection for mapping when I bought it. I need advice please! I work in landscape design and we, primarily, work on large country properties. We would like to incorporate...

Hi all Got my secondhand Phantom 3 Advanced yesterday everything seems to work ok. Paired up another controller with it and nothing works. It says the controller is connected and aircraft warming up then it says signal lost even though the status bars are lite up. I try to start the motors...

Hi All Looking for some help please. Had the P3A for 6 months, had over 100 flights no issues - one minor bump early on but no damage at all. I've recently started getting the above error message when turning the drone on, to resolve it I normally have to turn everything off (aircraft...