- Joined
- Mar 20, 2013
- Messages
- 69
- Reaction score
- 2
Hi Guys (and Gals in the interest of being PC
)
I have fitted the Phantom Upgrade Board and have the video out to TX lead. This has 3 wires: Yellow, Red & Brown.
I intend to connect it to an Immersion TX so that I can view the framed shot on a GoPro on the Zenmuse Gimbal.
The Immersion only requires two of the leads. Am I correct in thinking that the Red Wire is not used? Which way round do the Yellow and Brown Wires connect on the Immersion plug? I am sure I read it somewhere but I can't find the Thread.
Cheers
Ali
I have fitted the Phantom Upgrade Board and have the video out to TX lead. This has 3 wires: Yellow, Red & Brown.
I intend to connect it to an Immersion TX so that I can view the framed shot on a GoPro on the Zenmuse Gimbal.
The Immersion only requires two of the leads. Am I correct in thinking that the Red Wire is not used? Which way round do the Yellow and Brown Wires connect on the Immersion plug? I am sure I read it somewhere but I can't find the Thread.
Cheers
Ali