- Joined
- Dec 8, 2012
- Messages
- 440
- Reaction score
- 18
http://www.dji-innovations.com/download/zenmuse-h3-2d-gimbal-downloads/
July 12, 2013
DJI released Firmware 1.02, Assistant Software 1.02 & User Manual 1.06 for Zenmuse H3-2D .
What’s new?
Change the pitch control channel of WKM to X3 Channel;
Add Hibernation Mode for gimbal protection. In the condition that the camera is not mounted on the gimbal the gimbal will enter into Hibernation Mode, in which the gimbal is out of control from Transmitter. You must mount the camera correctly and power cycle the system to activate the gimbal;
Add Hibernation Mode for gimbal protection. When certain external forces act on the gimbal, it will enter Hibernation Mode too. You must take notes to avoid too large forces affecting the normal working status of gimbal and power cycle the system to activate the gimbal.
Assistant software
Change the pitch control channel of WKM to X3 Channel.
User Manual
Change the pitch control channel of WKM to X3 Channel.
Add description of Hibernation Mode for gimbal protection.
*Please upgrade the autopilot system to the latest Firmware.
WKM
NAZA-M V2
NAZA-M
Assistant Software
V2.00(or above)
V2.12(or above)
V2.12(or above)
Firmware Version
V5.22(or above)
V3.12(or above)
V3.12(or above)
July 12, 2013
DJI released Firmware 1.02, Assistant Software 1.02 & User Manual 1.06 for Zenmuse H3-2D .
What’s new?
Change the pitch control channel of WKM to X3 Channel;
Add Hibernation Mode for gimbal protection. In the condition that the camera is not mounted on the gimbal the gimbal will enter into Hibernation Mode, in which the gimbal is out of control from Transmitter. You must mount the camera correctly and power cycle the system to activate the gimbal;
Add Hibernation Mode for gimbal protection. When certain external forces act on the gimbal, it will enter Hibernation Mode too. You must take notes to avoid too large forces affecting the normal working status of gimbal and power cycle the system to activate the gimbal.
Assistant software
Change the pitch control channel of WKM to X3 Channel.
User Manual
Change the pitch control channel of WKM to X3 Channel.
Add description of Hibernation Mode for gimbal protection.
*Please upgrade the autopilot system to the latest Firmware.
WKM
NAZA-M V2
NAZA-M
Assistant Software
V2.00(or above)
V2.12(or above)
V2.12(or above)
Firmware Version
V5.22(or above)
V3.12(or above)
V3.12(or above)