I am experiencing a failure of the App to see the phantom v2+. Just started today after 3 months of inactivity. When problem started, I was on Android App DJI Vision 1.0.50. First I tried re-binding extender. Luckily I had kept the pkg. QR Code. Reset and re-binding the extender was successful but did not fix the problem. When I am on the first menu screen of the app, I have a green light indicating a connection to the phantom through the extender. But on the camera screen no data from the phantom is displayed and no image on the FPV screen.
Pressing the camera button to take a picture shows no SD card installed. Four different known good SD cards tried and no change.
When I power down the phantom while connected, connection is lost. When I check binding status it shows ssid and Mac addresses correctly.
I checked for software updates and found none. I knew about 1.0,61, so I uninstalled vision app 1.0.50 and re-installed getting the new 1.0.61.
Same problem, same symptoms, with 1.0.61
I believe it is an Android App problem, not the extender or the bird.
Any suggestions?
Pressing the camera button to take a picture shows no SD card installed. Four different known good SD cards tried and no change.
When I power down the phantom while connected, connection is lost. When I check binding status it shows ssid and Mac addresses correctly.
I checked for software updates and found none. I knew about 1.0,61, so I uninstalled vision app 1.0.50 and re-installed getting the new 1.0.61.
Same problem, same symptoms, with 1.0.61
I believe it is an Android App problem, not the extender or the bird.
Any suggestions?