Hi,
Would you please advise how connect to
P4P+2.0 drone from third party application installed on the controller GL300K?
Thank you in advance!
It is my understanding that the only automation software for
P4P+2.0 is DJI Terra. I am in the same boat and have tried out the 30-day free trial for the "Pro" version. It has a steep learning curve, and I made many errors before finally getting it right so that it worked properly. I was able to create and exicute mapping missions but not reconstruction of the data collected (deliverables to clients). They have Ag, Pro, Electrical and Cluster
DJI Terra - Product Information - DJI
The Ag version is $300 and will do mapping in 2D. For me, the Ag version is enough to get started and I am just starting a business with this in mind. Previously, before I knew about Terra, I was considering the purchase of a used controller which could set you back between $200 and $600 for the GL300L. There does not seem to be many remote pilots that use Terra so it takes a little bit to get it all figured out.
DJI Terra Agriculture 1 Year (3 devices)
USD $300
Starting at $153/mo with Affirm.
Prequalify now
Capture, analyze and visualize your environment with DJI Terra – an easy to use mapping software [1] developed to help industry professionals transform real-world scenarios into digital assets.
- Model reconstruction [2]: Import images to generate a high-resolution 2D orthophoto map and a high-accuracy 3D model.
- Real-time reconstruction [3]: Generate a 2D orthophoto map and a 3D model in real time during the flight to output results as you fly.
- Lidar data processing: Working with DJI L1, DJI Terra can generate high-accuracy true-color cloud points with one click.
- Detailed Inspection [4]: Automatically generate routes based on target points marked in a 3D model or point cloud to automate inspection workflows.
- Model application: Easily measure targets' coordinates, distances, areas, volumes, and other key data and rename or export the data results.
[1] A Windows 7 or later (64-bit) system is required to run the software.
[2] Minimum computer configuration requirements: 16 GB memory, an NVIDIA graphics card with a compute capability of 3.0 or above (4 GB graphic memory).
[3] Only Phantom 4 series are supported, and the configuration requirements listed in Point [2] also apply to real-time 3D reconstruction.
[4] Only supports exporting mission routes to Matrice 300 RTK or Phantom 4 RTK (NO-MONITOR RC).
HOWEVER... It doesn't show 3D missions in the Overview of the 3 plans as they contradict each other. (This is at the bottom of that page on the link above. I am literally trying to make a decision about which one to purchase myself)
Good Luck!